Search results

  1. W

    Starboard replacecement for nav pod Garmin 7212 mount on top right side of center console

    This is what I did in the hard top of my 228. Unit is a garmin7610, now working on install of 7608 in the helm
  2. W

    2006 228 through transducer

    there must be 228 owners that have installed a thru hull in bilge area , pics ?? :)
  3. W

    2006 228 through transducer

    garmin B 175 HW which is a 3 3/4 hole and self adjusts for the deadrise
  4. W

    2006 228 through transducer

    what to install a through hull transducer , is there enough room in the bilge area ?? any one have any pics of the install. I have two tanks so that area of the boat has no room , any ideas ???
  5. W

    228 seafarer through transducer

    has any one tried a through hull our have pic of the install in the bilge (2006 228), I believe the hull is at 20 degrees in that area
  6. W

    Lewmar Delta Anchor - HOLDS TOO WELL!

    We do a lot of anchoring here on the WESTCOAST up to 400 feet down using the ring and Scotchman ball system, and I would absolutely recommend shackling THE CHAIN to the head hole on the anchor and using heavy tie wraps threw the stem hole (I use 2) works perfect for the hang ups.
  7. W

    228 horn

    thanks Doc I will give that a try tomorrow
  8. W

    228 horn

    my horn just stopped working, can see positive leave switch and I assume there is a pos/neg that is soldered to each horn, has any one had this type of failure before there has to be a connection some where I cant get at or find
  9. W

    2006 228 cuddy/bin locks

    found the key or thought I did, put it in , fits perfectly only now it removes the cores ????
  10. W

    2006 228 cuddy/bin locks

    the overhead electronics bins in the hardtop , the cuddy and drawers under the seats I believe are all the same key
  11. W

    2006 228 cuddy/bin locks

    couple of my locks don't seem to be functioning im sure the cuddy and bin locks were the same key, maybe need some lube
  12. W

    228 seafarer through transducer

    its looking like there isn't much room there , Doc do you have aux tank in your Grady ??. I may have to find a spot in the bilge area
  13. W

    Finished Electronics Flush Mount

    that looks awesome im doing the same for my 228 with a Garmin 10 inch unit
  14. W

    228 seafarer through transducer

    it does look tight
  15. W

    228 seafarer through transducer

    I do have two tanks hull is 2006
  16. W

    228 seafarer through transducer

    look like I will be pulling a cover and having a look
  17. W

    228 seafarer through transducer

    thank you both
  18. W

    228 seafarer through transducer

    Thanks Doc , will look , is access easy, what was it like drilling a 3 inch hole in your bottom.
  19. W

    228 seafarer through transducer

    I want to install a through hull transducer in the bilge area, has any one done this , im trying to remember if there is room , would any body have any pictures
  20. W

    mounting electronics

    I've have really been thinking about flush mount in radio box, would be different looking a bit up vs glancing down but I can fit a larger screen in the upper