Search results

Does anyone know where in the bilge area of a 2003 Marlin the flat area to mount a thru hull transducer is located? What panel will I need to remove to access it?

I did a very similar conversion about a year ago and have been ecstatic with the results. If my macerator pump goes bad, now it is an easy external swap out! Grady White needs to end their association with Groco. That is a very poor design that will fail.

Does anyone have an approximate install cost for a 2003 Marlin? I would love to have one.

Does anyone have a special trick to free up a stuck zipper with salt water corrosion on my Marlin enclosure?

That is what I was afraid of. I am on the canal in Baypoint also. Thanks.

Does anyone know where the outlet that the microwave is plugged into is located? I want to install an inverter to keep from cranking the generator just for that but need to get to the plug. I hope the microwave is not hardwired.

I contacted Grady White and they told me thmarine manufactured them for Grady White. I contacted thmarine and ordered 4 new rod assemblies. I will take the old ones and try to replace the working end and keep them as spare.

Does anyone know if the joint on the end of the push rod for the seacocks on a Marlin are replaceable or does the rod come as a unit? Mine rusted off and it is a long reach down to the seacocks.

I have a Grady White Marlin 2003 with a windlass. Does anyone know the chain size the windlass accepts as I need a new rope due to fraying? This is a factory addition.

Does anyone know where I can get a switch to replace one of my accessory switches with one that has Livewell #2 printed on it?

You guys are making this too complicated. You should not have to take up the floor and switch the Y valve every time you want to go from pumpout to macerator pump. Simply remove the old pump, Cut a hole in the plate where the pump was to allow a 1 1/4 pvc pickup pipe to come through, and plumb...

I have a 2003 Marlin 300. I made the mistake of running with the seacock open and generator off. Water was forced into the manifold and into the cylinder. I could not crank the generator! Wonder why? I changed the oil and it was half water. I filled and drained the oil reservoir 4 more times and...

Does anyone know where the center of gravity is on a 2003 Marlin 30ft with twin 225 Yamaha 4 strokes? I need this info to properly position my boat on an elevator lift. Thanks!

I have a 2003 Marlin with the exact problem. This weekend I took the old pump off, removed the macerator assembly and cut a hole in it's place to allow a 1 1/4 inch PVC pipe to pass through. With some nylon fittings and connectors, I plumbed inline an external macerator that can suction out of...

My macerator pump out in my holding tank does not work. I have checked to be sure power is getting to it. I need to know what type of pump this is and where can I find a generic pump to fit.

I have marlin 300 with an on board Charles battery charger. The charger has an indicator needle showing when charge is occuring. The problem is it does not appear to work. Whether I am on shore or generator power nothing occurs even after draining the batteries. Any idea of where to start on...