Search results

Tomolalla, For what it's worth, I made some measurements today on my tank. Maybe they will be useful for you. It's 7 inches from the top of the tank to the deck at the forward inspection port for the fill hoses and just under 5 inches from the top of the tank to the deck at the aft inspection...

Congrats on the purchase! I have the same hull, same motor. I think my prop is 15.5/17 or 15/17.

Do you have the Yamaha fuel management system? If so, it will only show gallons used, not remaining. You'll have to top off your tanks and do the math.

It's been a while since I've had the inspection ports off, but if memory serves me correct, the tank is not flat on top. There is actually a raised area where the fill and vent lines come in to the tank. But I can't really recall. I was at the boat yesterday and now not again until next week...

Should be the other way around, no? Stern down, bow up since the fill tube and vent are at the bow end of the tank.

Assuming you're filling while on the trailer? How does your boat sit when connected to your tow vehicle? Since you're manually measuring the fuel level through the sending unit hole (I think?) at the aft end of the tank, and the fill tube is at the front of the tank, if the front of the tank is...

My only experience with a thru-hull transducer is one the previous owner installed. It was as far aft and as far outboard to the starboard side away from the keel as possible with access to it from the bilge (just forward and outboard from the livewell thru-hull pickup). Most of the time it...

Congrats on the new boat and welcome to the board! My 2 cents... run that 175 until it dies. With ours, the sweet spot is 4000-4200 RPM's where we can get 2.8 mpg on nice water, but the fuel economy curve is fairly flat from 3600 to 4400 RPM's. Guys posting numbers with 4-strokes are getting...

So did you do the automated radio check using the 504? If so, I'd guess the antenna is at least in decent shape since you were able to transmit. If you can transmit, you should be able to receive. If you turn the squelch down do you get static? I'm wondering if the speaker may have just crapped out?

Reading 13 volts on a new, fresh charged battery isn't out of the norm. Each cell can hold up to 2.2 volts per cell (6 cells total, for 13.2 volts). But typically the battery won't hold that charge for too long and drop down to 12.6 volts (2.1 volts per cell). 14 volts with the motor running is...

Are you talking about a stereo or a VHF radio? Stereo's will lose presets without battery, VHF's should not...

x2 on what Smoky said. The F150 is right at the minimum power for that boat, slightly under-powered for my tastes, so going stainless and possibly 4-blade should help. Your prop shop should allow you to sea trial a few different props to see what works the best.

I've had the cat using the bimini as a bed problem. The solution to that was to put a fender underneath the bimini so that it's suspended above the cabin. Had feral cat issues in the past dragging rabbits, squirrels, and whatever else they caught to eat on deck under the cover... Had rats get...

Link works for me with pics. Good work so far. I think she'll look great when completed!

I've never had that problem. From what I recall, the underside of the boxes are not gelcoated but there are no exposed fibers. Occasionally I'll take a spray bottle of bleach water and spray around inside there (and in the bilges), mainly to take care of any mildew.

I use the under step live well and storage areas on either side of the cuddy. If it's a good day and those get full, then a large cooler on the cuddy floor gets filled, but that doesn't happen as often as I'd like! I found a cooler that fits on the floor perfectly with the center cushions...

You could always go with a "west coast" style bait tank from Offshore Products (http://www.offshoreproducts.com/), Pacific Edge (http://www.pacificedgetackle.com/category.aspx?categoryID=40), Kodiak (http://www.kodiakmarine.com/) I have a Kodiak PF32 in my 208, which is functional but not the...

What exactly are the symptoms you're seeing? The F150 is right at the minimum horsepower for the boat, bordering on under-powered, in my opinion. Especially when loaded up with fuel, gear, people, rough water, and whatever else (I'm sure there will be some that disagree with me, given on how...

5000 lbs +/- a few hundred pounds is pretty close. For my rig, I figured the following in round numbers: 2700 hull 450 motor 550 full fuel 100 full water 1200 trailer 300 misc junk on board. = 5300 total I tow it with an F150 SuperCrew with the base 3.7L V6 which is also my daily commuter...

You are definitely missing a screw. It's a standard SAE 5 bolt pattern. The next trick is tracking down the right stainless bolt, which I believe is an Imperial size (though I can't recall what size it is at the moment...)