Search results

make your own dock lines, get 200' of 5/8 3 strand and splice a loop on the ends, if your worried about a storm, add a few lines, can;t go wrong with bigger and a few added lines.

You might be better off just fiber glassing the edges and gel coat it. If your brass tubes are breaking or failing the reason is water is swelling the wood causing the tubes break. Well that's what I found on my boat

I want to update my cabin cushions on my 1994 sailfish. I sleep well but wake up at times feeling like the foam is to soft and doen't support me well.I looked on line and see that you can get 4" toppers in firmer foam. I think the King size foam will make all four cushion with a little left...

I used the strip led lights, attached them with silicon calk. cleaned with acetone put a small bead, done.

I didn't drill in the top of the deck, all the mounting bolts are drilled in the side walls 1/4 inch bolts with big rubber and fender washers. I will try to post better pictures tomorrow.

I have a sailfish and mounted my raft on the bow. I made my own brackets to connect to the cradle, it's a OK setup that leave the weight off the hardtop. Can you zoom in on my pic to see anything, having trouble posting picture on here for some reason.

I had a one window front upper sense I put my hardtop on my boat, I couldn't stand the plastic window in the front any more,so I build my own fiberglass a glass enclosed . I love it and it makes a big difference in the view. if your going to do it look into getting what you want, canvas guys...

gallery/image.php?album_id=23&image_id=563 I made a mount and put it up front, I like that it's low and easy to get to. I have a sailfish.

it's sounds really strange that both motors will not crank over, I would look at all the safety switch's start with the helm neutral switch. can you spin the props are they in neutral. But if that all good check your grounds, might try using a battery booster pack right to the starter and...

i did the same thing 6" block made the radar and flir work much better. :P

Its Muriatic Acid, will clean everything , just have to wash it off metals.

when my switches stick I take a garden hose and blast the stuff out of it, the bulge gets a lot of everything in it, the switch it self gets the crap stuck in it, I use a good soap that will cut oil, grease , blood and fish guts and what every, maybe some on/off cleaner , then rinse it out. I...

This was the style i was trying to copy..... [/URL [url=http://s994.photobucket.com/user/freddy063/media/Tapered_Mast_medium.jpg.html]

Last year I added the sea view mast and like it, but I just wanted to raise it up a little. This is what I came up with. What do you think?

I have basically the same boat 1994 sailfish 272, I spend a lot of time out on the water and use battery power to it's limits .Most of the time the fish finder plus other items tend to drain the battery down to a very low level. This year i bought the Blue sea ACR units and will install them...

I switched to a 4 blade , have to look and see what size I put on , but it helped last year. I would try that route.

I agree added more chain will help any anchor hold tight, try that first before a new anchor.

what type of EPIRB do you have? is it a auto release , if auto, how deep does it have to sink to release? Will your boat sink that far? Most Grady will sink and just float a few feet below the surface with some part of it afloat, unless it burst into flames,then it will burn to. I would mount it...

Did they have a guy sitting on the bow with a 240B pointing at you? How can they do the same thing???

just wondering who uses ring free , and is it every fill up, couple times a year, etc.....? :hmm