Search results

I am looking for a suggestion for a prop for my 87 offshore 24 with bracket and 2008 etec 250 ho. I acquired the boat last year and it has a 4 blade stiletto 14 1/4 x18 but engine was lugging max 5000 rpm engine mounted doin top hole lowest position . Anything over 4600 rpm I would get a...

Mine had hole ordered direct from th marine

It’s made by TH marine order directs save money https://thmarinesupplies.com/products/seacock-remote-operation-arm

Nice work did this in the spring also! Women really Fall for a man with a clean bilge

I have an 87 and love it!

Congrats!

Thanks to all those who responded!

Is it like the photo below. If so the cracks are on both knees but only on the inside facing the bracket bolts the outsides are perfect

I am 250 lbs and have a etec 250 ho on bracket and I can jump up and down on bracket no flex. What are the glass tabings?

I did poke it and it’s solid. The Rear of the transom has no ripples or delimitation so I am crossing my fingers that it will hold out without any catastrophic failure In the immediate future I really love this boat and would not be afraid to rebuild transom down the road. Just not this year

Thanks will pick up a copy tomorrow. It does not look bad to me but I wanted to ask other owners what they thought.

The removal required cutting the hole open about a 1/2 inch I used a angle grinder with a cutoff wheel. The hard part is replacing the fuel fill and vent lines. There are plenty of great threads on this here. It’s a weekend project start to finish if you have tank. I probably could do in a day...

Just did mine last week Paul from Patriot is the man!

While doing a some repairs on my one year new to me 87 offshore which included fuel tank and hose replacement, through hull fitting and hose repreplacement. While upgrading the electrical I removed the live well and noticed these cracks on the transom knee stringers. This boat has a bracket and...