Search results

So, finally got the new hatch in from Bomar, and .... it doesn't fit. Long story short, the part number is right, Bomar apparently changed the hatch dimensions over the years, but kept the part number the same. The reason I know the PN is right is because I pulled the old hatch, Bomar...

Quick FYI, per Grady, original hatch was made by bomar, and is part# n1318-10a. Ordered today, should be in within a week. Alex

After looking at it closely, I now believe the hatch on my boat is not the original one. The plexiglass seems very flimsy, the screws from the inside don't look right, and the carpet on the ceiling inside has markings of a slightly different frame. Not good at all. Want to fix correctly...

I plan to call Grady to get the manufacturer / part number of this hatch, then call them directly. Do you think that 100% silicone has the strength to hold the weight of the hatch frame? The old adhesive / sealant is dark in color, not sure what that means, if anything. Is this a tricky...

Hello all, The glass separates from the alum frame when I open the hatch. I noticed the riser arm pushes up by the glass, not by the frame, and I guess over time this happens. Obviously, when it rains I get a couple of drops in the cabin. What adhesive / sealant / glue should I use to glue...

Re: Voyager 248 - Anchor stuck on bow pulpit Hi all, Thanks for your replies. Well, I removed the anchor off the pulpit, and so glad I did, since the trailer winch post hardware was hitting the pulpit roller when launching / retrieving the boat. I took the trailer back to the shop and they...

Ed / Biscayne208, Check your PM. Alex

Re: Voyager 248 - Anchor stuck on bow pulpit For now, I removed the anchor/chain/rope from the windlass, and will go manual with a small danforth (that came with the boat, may have been the original) until I figure things out. I'll probably upgrade the pulpit hardware (doesn't seem strong...

Hi all, First, a quick into. After many months of reading and research, I pulled the trigger yesterday and bought a 1996 Voyager 248 (first boat). The kids are already asking when we can put her in the water, but of course, I already have a list of things that need to be taken care of before...

Screen name - aa331 First name - Alex Year and Model of your Grady - 1996 Voyager 248 Year and make of your engines(2) - 2000 Yamaha 150 HPDIs