Search results

thanks for all the info. I ordered the toggles off amazon to but I also have a west marine close by to.

I removed the factory folding seat in my 1995 192 to make room for a big cooler for a fish box and now I'm going to install a pedestal seat similar to the factory helm chair. I know that I need something more than screws to mount it to the floor. what about the stainless snap toggles? any other...

I have 1995 192. transom seems very solid but I would like to reseal around the transom cap. what should I use? question 2 is one of the drains in the spashwell is worn out it has tranducer cables ran threw it and I guess that what worn it out. the other is fine. it looks like a brass fitting...

my tank is a poly tank. a little crusty maybe from over 20 years but not bad looking. my sending unit bolts were kinda loose so I hope that was it. it had been several day since I ran it and if that's what it was all the gas would have been evaporated anyway. I have already replaced the line...

thanks for all the advises. I am going to borrow a fiber optic camera from work with about 2.5' wand on it and try to inspect as much as possible. then I may just replace all the hoses because they are so old. aslso may run it in a couple day with the inspection doors off to see if I can see...

so this morning after work I took the access cover over the sending unit and took all the bolts out from the sending unit and inspected the gasket. the gasket appeared to be in good shape although the bolts seamed not very tight. I reinstalled and tighted bolts. I also raised the boat as high...

i have a new to be 1995 grady white 192. The boats is in overall good shape. not banged up too bad and no signs of rot. today I had one of the inspection ports open and it had a fairly strong gas smell. first thing I thought was the tank but after using the search function on this site it seams...

anyone on here have a bow mount trolling motor on a 192. it will be used in fresh water. I would like to see a picture of it mounted if possible and I'm mainly want to know what lenth shaft that you used? thanks

Re: grady white 192 fuel lineasv Today I swapped the coil from the cylinder that was not working to another and the same thing. Same cylider. Sound like it was to be the carb

yesterday I hook the hose up and removed 1 wire a time and could not tell any difference in the way it ran. took it to the lake and ran and removed 1 plug wire at a time and found that the middle cylinder on the right side made no difference when I removed it. I then swapped spark plugs and it...

Update: seems that the sceen in the 90 deg fitting in the top if the tank was clogged Now the 1995 yamaha 150. It will not turn but about 4600 rpm. Does not seem to be ruining very rough. But it think that it may not be firing on 1 cylinder. Just an idea. Should the v6 150. Still mostly run...

I agree that it does sound like the vent. I did not try loosening the cap while it was acting up but I did take it loose at the tank last night and blew threw it and it seemed Clear.

my new to me 1995 192 with 1995 150 Yamaha was running good but last part of the day sunday it started like it was starving for fuel, never cut off and the bulb was sucked flat. previous had the fuel line from the new spin on filter housing to motor replaced. I checked the anti siphon valve...

Well I finally got it. 1995 Grady white 192. It has a slightly saltwater crusty 150 saltwater Yamaha that runs very good. Boat is in great shape. It really rides good nice. Had to do a little adjusting on the trailer and got loading very well. Previous owner just had all upolstery redone. Would...

Thanks for the transome advice. I will do that. From the pictures it looks to be a very nice boat. Late 1990's 150 Yamaha. I hope that I is as nice when I go Friday

Thanks. I am going to look at it Friday. Not sure if I can find a surveyor. I am going to check for rot in the transome. Any advice on that? I have had several boats and been around them my whole life but never been around any Grady white boats.

I going to look at a 1995 192 tournament. Looks nice but what are some things to look for. How to tell if the transom is solid? I have not seen in person one of these. I have seen a key west 19 dual console. How are these in comparison as for as size? Opinions please