Search results

Thank you. It was prewired and was laying in the back

I have a 2000 208 Adventure and my girlfriend bought me some underwater lights. The switch panel has 4 accessory switches that have been prewired. One is connected to my raw water wash down and I found one of the wires for the switch in the back that I connected to my livewell pump. Does anyone...

I have the same boat and have an 82 gallon poly tank. I will tell you that the fuel gauge is very conservative and when my gauge shows an eighth of a tank I only fill 40 gallons. The way you can check the fuel tank size is removing the port side cubby and stick your head in. My fuel tank ends...

Just buy a stand pipe, they're 6.95 I just bought one for the live well install I did on my 208 last Tuesday. Keep the pump running and it will refill itself.

Yes not only in ride but in resale value. I guarantee you will be happier. I'm not a disgruntled Aquasport owner but the quality and ride just can't compare to a Grady.

Can't even compare the build quality and ride quality to an Aquasport. I owned a 22' Aquasport and my uncle has the 275 but I am so much happier with my 208 Adventure. The Aquasport I had was a 2002 and had a soft floor, fuel tank had issues, t-top had cracked and countless other issues. Take it...

I would install a pulpit and then intall a horizontal lewmar 700

Biscayne208 has one on his boat and on his boat has 300' of 1/2 8 plait with 30 feet of chain. The line has never tangled on retrieval.

I found a used tach that I may purchase and try first. Then I will try the prop if that is not the issue.

I'm not trying to run the boat at those speeds. I'm trying to achieve the best cruising speed with the most efficiency possible.

Thank you Parthery. I'm getting the same top speed as you but I'm only getting 5200 rpms max. Do you remember what brand prop and diameter you had on it?

Hey guys I have a 208 Adventure with a 200 Yamaha ox66. The motor currently has a black painted stainless steel yamaha prop that's a 19P and the motor is mounted on the second hole from the top. I am only able to achieve 5200 rpms with trimmed out. I was wondering what props everyone is running...