Search results

+1 for Shipyard Island Marina for any Yamaha Parts

Just depends on how much you want to spend. Ebay has Deluxe Yamaha covers for $78, same cover as US Boating Supply who wants $104. I think breathable covers are better [2 cents].

West Marine sells seat parts.

Yes I have both cleats, starboard and port and will use those for tie off as you suggested. I didn't phrase my question very well,I was not able to get anchor rope and chain in locker because of the rod that went from top cleat behind windlass, to inside of the trailer eyelet. It pretty much...

I have a Fortress FX-11 anchor if you are interested, came off a 265. I want $45 plus shipping the dimensions are 28" shank,16" flukes, 22' stock. It is in very good condition. They are aluminum anchors.

I had called Grady today they said the rod has to come out to use the windless. The rod is suppose to stabilize the front cleat, however my front cleat is a retracting type which he said didn't come that way [retractable]. It doesn't have enough room to put the rode the way it is.

I have a new windless on my 265 express and would like to know what ideas anyone has on tying off anchor rope in the bow. Just behind the windless is a retractable cleat with a rod that goes down and is bolted to back of front trailer eyelet. I do not think rope and chain are going in without...

I will post as soon as I get a chance to run them, looks like it might be a couple of weeks before I have everything back together. A few repairs were needed that I hadn't counted on. The whirlpool begins.

Was reading these posts with interest, as I am switching to 4 blade props 14 5/8x17 REV 4's recommend by Ken. There is quite a bit of size difference in what has been tried here, guess will see how it works out. My boat [265] has f225s on it. Sounds like most of these test were over propped, so...

100 percent clear silicone works great, everything needs to be clean and dry till it cures.

Hi,I would like to donate but when I click on site it says error 404 page not found, any suggestions? Thanks Never mind just had to look up to top of page Duh.

Thanks again, I added a four degree shim and went with a 4" raised mount.

Does anyone know what angle [what degree ] to mount an 18" Garmin round radar unit at on a 265 Express ? Thanks

Great looking boat, I purchased a 265 express off an add from the forums and had the boat towed 3200 miles to the west coast. Bought it from photos supplied, seller was a private party and everything was as he said. I was very pleased and the Grady White forums have been a great source of info...

I bought a set of aluminum gimbal mounts on Ebay from a gbyerly 2, very well made, was going to reinforce the rod holder mounts with a piece of 1/2" ABS plastic underneath the holders to spread the load out. I guess well see how it works.

Thanks, I will be ordering gimbal mounts

Hi, I 'm new to forum, have just purchase a 265 express and was wondering what recommendations you might have for mounting scotty downriggers. Didn't really want to drill the edge, but probably the best way. Thanks