Search results

ebay or greatlakesskipper.com. i just went through the same thing. i bought all new perkos on greatlakesskipper.com for less than 150 bucks (7, including 1 1/2 inch) PS...all bronze. West Marine had them for 40/piece

take the time to research parts prices...I've bought almost everything from ebay, greatlakesskipper.com and jamestowndistributors.com. I've saved incredible amounts of money restoring mine (85 Trophy Pro). Post some pictures, I'd love to see em'. PS: check the transom! I got lucky with...

jims marine. fantastic work in west oc off route 50. tell him steve with the black grady referred you.

I'm re-doing the dash for this weeks project. Can anyone tell me what, if any, gauges are compatible with the bennett trim tabs? I'd like to keep the "decor" in order, and didn't want to spend $$$$ for their fancy pants panels since I already made a switch panel for all the trims. Thanks in...

if you want a larger fishing area with the 25 and twins why not look for a GW trophy pro...i believe they have a smaller cabin with more fishing space then the sailfish....

more or less, until you get into efficiency of cylinder heads (cfms), cam duration, valve placement and size, lift and overlap, bore and stroke, compression, etc. My last race car was a 2.0L Eclipse that put down 624hp to all 4 wheels (had a turbo the size of a frizbee), so its not always the...

They're all hemi's as long as the cylinder heads are basically hemispherical and the spark plug is around dead center of the dome....A marketing ploy that has stuck for YEARS.

surely will do. Again, I appologize for the response I had no intentions of misleading anyone. I think you might be right about the beer bong application, in fact, maybe I will see what I can do with it :lol: . I wouldn't see what harm would come of using fuel fill hose for the scuppers, but...

I didnt mean to mislead anyone, I just learned something new. :oops: I will be changing them out this weekend then. Now what am I going to do with this useless roll of clear hose? I have fuel hose left over from replacing the tank fills. would this be acceptable? Its the marine below...

home depot has the hose. its clear so you can see if they get backed up by anything. they also have a woven nylon reinforcement as opposed to the metal, so when you do go to replace them again it will be alot easier. i bought the last 10ft of roll they had for 10 cents a foot. maybe you can...

I know I'm bringing up an old thread but I would love (almost need!) to see the restoration pictures. I'm in the process of restoring an 85 Trophy Pro and need all the help I can get :lol:

16K??!! I bought an 85 Trophy Pro with twin rude 200's and a rebuilt trailer for 3500 bucks. It needed about 9k of work...But still......get rid of the 1 before the 6 and I think you found a deal.

I got them from Taylor Marine in West OC MD. They've been great with prices for me. Their phone number is 410.213.1391. Hope it helps.

I searched high and low to find these figuring that going to the Grady dealer would be the most expensive....well they were the only ones that had them for the whopping price of 5.00 a piece. They are better than what you had in there also in the fact that the ones they stock are one piece...

I was inside my cabin working today (85 Trophy) and it looks to me that you first need to remove the storage box under the pass seat and disconnect everything from there. Then the access I believe is from inside the cabin, where you would have to remove the false wall and the floor of the false...

It will be kept at Murrays Haven, we have a slip there. I'm sure we will see ya going through the inlet, pending I can get some issues I found resolved. The marine surveyor that originally checked the boat out came by my house today and pointed out that the front stringer is seperated from the...

I second the recomendation of Jim's Marine. He just redid alot of fiberglass on my boat and it looks factory fresh. Tell him Steve with the Black Grady sent you down there.

Its usually around 100/foot and that should include prep and materials. Thats kinda why I wanted a black boat, to be different. If I could afford a new Grady in black, I would be ALL over it.

its a 2008 Frontier :wink: I think if it were a Tacoma I probably would have had some problems, they have alot less power than the Nissans. The truck pulls it fine, it just may be a tad light for the boat. Don't be expecting a pristine boat fellas, I told you it was a resto in progress :lol:

oh no! maybe I shouldnt have posted pics, I wanted to be the only grady "black." :D I will post some pictures once it stops raining here in DE. Cheers, Steve