Search results

You can check and if you need to refill right at the helm. There is a small screw plug right on top in front of the steering wheel.

I read somewhere GW was replacing the effected cushions.

George just put a T in the inline fresh water hose and put a spicket where ever you want it.Clamp tight and you will always have fresh water pressure whenever the fresh water pump is on.

Im sure a window screen will keep the birds out, not sure about the raccoons

Just a few pics from the annual Jones Beach,NY Air Show. Weather could not have been better and The Blue Angels put on an outstanding show..Im sure glad they are on our side... 2005 300 Marlin w/F250's

Why not?? :? 2005 300 Marlin w/F250's

From what I recall if you hold down all the buttons at the same time for about 10 sec it will reset to factory settings.

I guess if you went with 3 or 4 hinges it would support it but you would still want to keep the gap caulked. It might be just as easy to unscrew the hatch because you would still have to cut and remove the caulk anyway.

The hinges are very solid, in fact I bought 3 which was my original plan but after seeing how the 2 supported the hatch I decided to go with 2. When you say full size deck lid are you talking about the removable hatch above the fuel tanks?

A bump for Capt Armchair

Like Fishtales said I motified my panal and put in a new drain system so most of the water will drain out of a thru hull that I installed. I never liked the way the panal would sit and Grady used small strips of rubber to build it up to make the panel level with the deck. If it wasnt perfect the...

So do I.

I have been a regular at their gas dock for years and I must say they are TOP NOTCH and great people to deal with!!! 2005 300 Marlin w/F250's

Collinite fiberglass cleaner.

That would be my guess too.

I never liked the idea of using muffs, I prefer a barrell filled with water so the engine can take what it needs.We had the same issue with my fathers F150's after replacing his waterpumps this year using muffs..No pee. As far as counter rotating, both shafts turn clockwise..there is an extra...

Another thumbs up for NBOA.Give Micky a call. He hooked(Pun intended.. :wink: ) me up big time. 2005 300 Marlin w/F250's

Try using heat from a heat gun or hair dryer..Carefully not to burn gelcote

Last year I took a peek at an 08 33 leftover at a local dealer. Before I sat down I told him it would have to make sense for me to consider signing.When we sat down he offered me 20k less on trade then what I owe on my boat(and I put over 50k down).Soooo for me to consider it,it would have to...

Thats a big NO-NO with the HPDI's..I was told dont pre-mix oil with gas EVER even during break in period. 2005 300 Marlin w/F250's