Search results

What ring terminals do you guys use for NEMA2K power cable and Garmin power cables? Those wires are TINY! They must be like 22-24AWG. I did not find any heat shrink ones on line. Do these typically get soldered and then heat shrink over that? My plan is to attach to the fuse panel for power...

Guys, My problems seem to have gone away by removing that wire on the fuse panel. I cannot find where it leads to and I have zero idea of what I am missing by not having it plugged in. I have since replaced the fuse panel from OEM to the BlueSeas 12 slot panel. This is so that i can...

Thank you all! My 2005 Yamahas do have the white connectors with the blue white wire. I am hoping that I can pull some data from them via Nmea but not sure yet. According to the serial number they should not be command link ready but I am going to test. If so, definitely running to the...

i just got the proofs from New Wire marine. Thinking about having a couple/few switches on the right side of the helm, “gauge panel” I guess we can call it. One of which could be this fuel sender switch. since There is no breaker currently, and I don’t believe that it goes to the fuse panel (...

Congratulation! Looking forward to my first run on the 265

So you think that the first position switch is the fuel sender? It doesn’t have a breaker. I just assumed it was one of the ones that doesn’t work. Thanks!

Hello, I am in the process of having New Wire Marine redo my dash, gauge panel and switch panel. I am not able to see the covers on the switches to replace them. I have a few that appear to do nothing. I went to Grady customer service with my HIN and they do not have the diagram for my...

Just got a couple of the 1243XSV’s with Navionics. Coming from Furuno I’m excited to play with this stuff. Need the panels from New Wire to come in. If anyone has seen my battery switch thread, I have plenty of power! Just can’t turn it off

Im pretty sure it’s a factory installed windlass. breaker and switch are to the right of the helm. Power comes from the bus bar It looks like.

I made it to the boat this evening for a couple of hours. Not much progress. I had to make templates for New Wire marine since that will take about 6 weeks to come back. Also, ordered all of the electronics today, full Garmin suite. Man, that was expensive!!! Anyway, I tried the meter on the...

Stay tuned….have family stuff today but will try to get to the boat early this week. Thank you!

I see what you are saying here. You are probably correct assuming that the switches are the same. I took the middle lug as the feed as interpreted from the drawing. However, you are probably right that it’s the same switch as the other side. This one is not labeled batt2 like you can see in...

No I don’t. I don’t actually start the motors because the lowers are off and no hose hook up. When I test for start I just hit it to hear if the starter turns.

I don’t know how to label the pictures but the first three are the starboard side, the next two are the port side and the final picture is the fuse panel. The starboard side switch appears to be wired like the owners manual picture. The battery has the return from the 40A breaker wire AND...

When both switches are off, and both batteries are removed from the starboard side everything is finally off. No lights, No motors and no pumps.

Starboard side

So I am at boat now. I removed both batteries from the starboard side. I removed the battery switch which appears to be wired correctly per my owners manual and Skunks picture above. However, when I switch the port side switch on 1,2, both everything works. All pumps, lights and both motors...

I suppose that this is possible. However, when i removed the terminals i zip tied them together and marked with tape so not to mess up the replacement. I just need to get to the boat to take apart the switches to see how they are wired. I can tell you that the second battery is wired in...

This forum is great! I have only been a member (and a Grady owner) for a very short period of time. There are so many folks willing to help. Thank you! I, hopefully, answered everyone's questions to help further the trouble shooting exercise. I'm going to try to get to the boat tomorrow to...

Thanks for the suggestion. I will check this out. Boat is on the hard getting dreaded exhaust repair done to the 225's