Search results

The blue will be down low by my hip/leg while driving, as I stand at night, can see better than trying to look through the slanted windshield with glare off the dash, so pretty sure it will be a non issue for me. As far as the wiring, I haven't decided if I'll hardwire directly to new wires or...

Most definitely.

My New Wire Marine switch panel arrived today. Looking forward to getting it back in the boat. Moved a couple of switch locations around, picked up 2 accessory spots, put breakers below the switches and added a back-lit Grady-White logo in the unused space at the end. All switches and logo are...

Getting ready to go through this as well. When I repowered, I installed new digital gauges and the fuel level is shown for both tanks. The original Grady setup was a switch to toggle between the 2 tanks and one reading on the old gauge. So I pulled the switch panel and cut the two pink wires...

Gotcha. Hopefully someone will respond that has a 208 and can get you measurements.

Do you have original cushions?

I have 8 of them, 4 pairs, different sizes. Use to slow my drift down depending on the wind.

wrxhoon is correct. I'm running one of the drain plug lights from BoatPlugLight.com

All our sea cocks and pumps are under the livewell on the 228. New Rule 2000 bilge pump in top pic, old Attwood 1250 in bottom pic. Livewell pump pictured also.

A&J Canvas in Vanceboro NC is the original supplier for Grady-White. They made me a new one for my 2004 228.

Hook,,, looks like he already called Ken. Third sentence in says " recommended by Ken....." I'm running the OSF4 on a single setup on Ken's recommendation as well. Great prop. Repowered last year from a 3.3 F225 to a 4.2 F250 and kept the prop. Ran it for a little bit on the F250 but took it...

Same just now,,, nothing.

Find a good welding shop that can weld aluminum. I've had mine done, just be aware there are wires for spreader lights running in the tubes depending on which area you're welding in. So far I've had no issues with the wires in my tubes and weld being done.

Grady-White by Pompanette Sorry, these are the best I have. Had to zoom in on pic and screenshot them. I'll be around the boat this weekend if you need better.

A picture of location would help. Is it on the back of the chairs or the front of the cushions? Older style had both sometimes.

Gotcha. If you have access behind mounting location you could always put a backer plate on the inside to spread the load.

Quick Google search is your friend. Look for "side mount table for boat".

Being as yours is a 2000 model, everything you have asked about is sourced outside of Grady-White as the boat is 24 years old. Grady-White quit building our Seafarer's a few years back. The swim platform, you may find a takeoff somewhere, check ebay.com and Craigslist. The cover will be a custom...

You need to post a price or this will be deleted. Usually scams ask to contact by text or PM. Anyone interested in this boat, please do your due diligence to verify authenticity of this boat for sale.

Yup,,, or you can just get new covers for existing switches.