Search results

I cut the hole on the deck behind the door. I don’t have a pic but there is one similar above. Tried to center it to look the best it could. I was concerned if I put it on the side panel, I would have a hard time reaching the drain to put upward force to get the stainless piece to screw into...

I just did this job and it was no fun for something you would think should be easy. I guess it shows how well grady builds boats, but how poorly this was planned for access. I was able to get to the port ones after taking a few things apart, but no hole. On the SB side, not so lucky, like...

Thank you, that's what I figured, but wanted someone to confirm. Sure the salesman would tell me it would be just fine. If anyone else in FL is interested in these engine, this is an amazing deal from what I have seen...

If you look at building a new Marlin 350s are offered, but am not sure if they added anything to make that possible.

Just wanted to see what peoples thoughts on this topic. I am looking to repower my 2005 Marlin 300. The specs show that it is only rated to 600 hp. There is an amazing deal on Honda 350s, which I would guess would give me better cruise speed and fuel burn, but not sure if the transom can...

I have 2005 Marlin, guessing the stern fish boxes are the same. I make 3 large blocks in deep freezer and then throw a couple 20lb bags on top when we go to the Bahamas in the summer. Even with that heat, there will still be ice in the box at the end of day 2.

Make sure you update you profile

Yeah, you have to buy big pieces, which is why I was selling. Sorry, just sold the last piece I had.

Hi Cliff, this is where I got it from. https://www.integritymarinecorp.com/product-page/f8252

I believe so, but I will let you know for sure when I can check.

I went from a boat with 2s to a Marlin with 2005 250 4S. Just the ease of starting and lack of noise and fumes would be enough for me to make the change. My whole family appreciates the quieter and no smoke experience. Cruising at 4200 RMP, I get about 1.3 MPG.

I have 38' of this trim left over from my projects. It is $4/ft + shipping. Please message me if interested. It worked great to replace mine.

Here is comparison to mine. and the backing adhesive.

I finally got the trim delivered. I attached the picture of the front, back and a comparison with what is currently on the boat. Seems to be an exact match. So I don't need to go to the figure out all of the shipping, I'm just going to do $4.50/ft which includes the shipping. Please message...

Roll from manufacturer is on back order for a couple weeks. I will update in here when i get it. Thanks

I would think that it is the same. I really am only seeing 2 sizes for Grady's. I bought it for a 2005 Marlin 300. I will post a picture of the product once delivered. I would just say measure your current trim to make sure.

I ordered this one - 1 3/8 x 1/4. I will post a picture of the product when it arrives.

if anyone one is looking for this, I just ordered a coil of it and will have about 42' left over. Let me know if you are interested. F8252 Flexible Tape Color:Creme 54' coil