Search results

  1. E

    2017 Express 350 yamaha's

    WTF?
  2. E

    2017 Express 350 yamaha's

    1. 330 or 370? 2. i cruised at 3800 to 4000 with my '09 330 with 350's. never a problem. good luck, ron
  3. E

    330 battery charger wiring

    download the 2017 manual for the 330. you'll see how it left the factory and then you can take it from there as others have indicted.
  4. E

    330 battery charger wiring

    if this upload worked, it's a 2009 Express 330. good luck, ron
  5. E

    Electric Steering Upgrade and Autopilot

    if it's just end caps they're pretty easy to replace. make sure bleed valves were retightened correctly and no leak in any other part of the system. power purge to make sure the system is charged correctly. as mentioned above, you can always do any modification you would like, but is it...
  6. E

    Tips needed - Windlass nut removal

    look carefully at the video. yours was worked on. not the same fastener as the tech removed from the gear assembly.
  7. E

    Trim tab cylinder lower attachment eye cracked

    you might want to email Bennett directly on their website. very helpful and very quick responses.
  8. E

    Tips needed - Windlass nut removal

    possibly not made to be separated. check how a replacement part is configured. one piece or multiple.
  9. E

    Flush Mount Remote Control Freedom 205

    if there's no other access point, probably thru the speaker hole. cant see what's in front or behind the throttle in your pics.
  10. E

    Corrosion of trim pump

    pump covers basically suck. should be ABS. had to clean and paint my F350s annually. replacing both on 2021 F300's (under YES, see my comments there). i would plan on replacing. good luck, ron
  11. E

    Yamaha Extended Engine Warranty - Is it worth it?

    If it breaks it's worth it. if it doesn't it's not worth it. just like any other insurance. i get them for piece of mind and they kicked in a few times. good luck, ron
  12. E

    Engine distance suggested by GW and source Vinyl bang cap other than GW

    i believe engine placement is based on hull bottom and anti-vent plates positioning. your installer should be able to tell you were they need to be set.
  13. E

    Shorepower breaker

    belay the isolator comment. that pic looks like the grounds going to the isolator. you should still verify corrosion issues with them and the isolator itself.
  14. E

    Shorepower breaker

    one more thing. if you haven't been in there for a while, be ready to replace some of the wire runs if they show signs of corrosion
  15. E

    Shorepower breaker

    yeah. galvanic isolators are a bit larger now as far as i know. you may not get the exact breaker, but they are available. agree that you need to verify the galvanic isolator aspect. ron
  16. E

    Generator space

    the space is not a "fast access" area. you have to deal with the seat, the vertical door and the floor latches (if you don't lock them down it will vibrate). there is a ton of space though. the Marlin spec should have been with the batteries in the center. relocation to port should have been...
  17. E

    Generator space

    well if you haven't been in it in the water you will notice the list when you do. the 2021 had a starboard side drain in the fishbox. did not drain due to the batteries. great boat tho. have fun, ron
  18. E

    Generator space

    i did this because battery placement was hard port list.
  19. E

    Battery runs low on anchor

    weird. don't know why it didn't just post the image. download is clean. Ron