Search results

  1. E

    Garmin Reactor 40 on 330

    i didn't have an AP. But, the power assist for the f350's was mounted in the starboard mid berth void where the vacuflush is. i mounted my heading sensor in the upper part of the locker between the head and mid berth. good luck, ron
  2. E

    Marlin owners or 30 / 33 express .... which tank ?

    330. same both tanks. performance and handling aspect. ron
  3. E

    Grady White 36' Express repowered with Yamaha 300 CV

    you said props "OK". the 2 outboard props should be the same pitch and diameter. the center prop will not be the same, i do not know what the correct numbers would be (and i wouldn't ask the dealer). once that is locked down, you may want to just pull the props and have them scanned to make...
  4. E

    Insurance question

    can't remember but i think i'm 4 months layup.
  5. E

    Freedom 275 Bow Thruster

    personally, i wouldn't buy a boat without one. i've been boating most all my life and you come to fully realize that boats don't drive like cars. a while back i read about them working on a system for small boats; kinda like a little puffer system. only my own opinion. like the meme...
  6. E

    Grady White 36' Express repowered with Yamaha 300 CV

    legit dealer do the work? props matched correctly?
  7. E

    Seacock stuck

    if they don't move easily once you work on them, time for new ones. they should be screwed in to the thru hull pickup so it should be straight forward replacement. need i say ALL work would be best done on the hard? good luck, ron
  8. E

    Moving motor flusher

    on a serious side, you may want to swap out the brass for bronze or a synthetic if you boat saltwater. i was going to do the external setup on the 330; it was getting to be too much bopping around back there. ron
  9. E

    Moving motor flusher

    not to blow up your shark tank dreams, but 1. saw that rigged on a 30+ Scout at an early 2000's boat show. everything external mounted to the transom and B. that's how they come from the factory now. o_O gonna save some monkeying around when flushing, that's all that matters. good job, ron
  10. E

    Drain in back of Boat

    where is it?
  11. E

    Bonding seacocks

    fwiw, i specifically asked GW about this a while back. they stated that they do not bond outboard motor boats. ron
  12. E

    Marlin 300 model refresh?

    they went thru an update recently. always room for a tweak.
  13. E

    STA-BIL 360

    you've obviously never boated in the north :D that's pretty much sop for our winter layups. mine comes out in October and back in April/May (last year end of June), that's what the stabil is for. and we have 10% ethanol. i always burn down the layup gas before i put fresh fuel in. if...
  14. E

    Cruising RPM's?

    yup. the 330 with F350's 3800 -4000, 4 blades. around 28 MPH depending on conditions. ron
  15. E

    Wireless MOB Kill Switches

    i've been using Autotether for about a decade or so. fairly simple. good luck, ron
  16. E

    Public Service Announcement

    docks are floaters. i'll cast for missing plug, broken thru hulls, etc.
  17. E

    help finding hatch flush nuts

    look up "sex bolts" you'll get more than enough options. good luck, ron
  18. E

    2021 Freedom 255 - is the Electric Head Fresh Water or Raw Water?

    can't speak to that, but the 2021 305 was raw water.
  19. E

    Appropriate dock lines

    5/8 double braid, pre spliced. at least that's what i use. chafe guards and snubbers for the dock cleats. i use multiple sets. dock lines stay so length is based on layout. on board are 30 footers. good luck, ron
  20. E

    Clean out fresh water tank

    http://www.camco.net/spring-fresh-1-gallon-bilingual-40207 i use this every year coming out of layup. good luck, ron