Search results

  1. S

    Prop Options for 330

    I have the same boat and going to do holders somehow. Looking forward to the new topic and responses.
  2. S

    2005 330 Express, trim tab leaking at assembly hinge

    Good call. I’ll post a pic and vid tomorrow.
  3. S

    2005 330 Express, trim tab leaking at assembly hinge

    Was putting final touches getting ready to launch and tested the trim tabs. Pump activated as normal but went to back of the boat and fluid was flowing out the actuator. Traced it back to a pinhole in the hinge. Assuming I have to replace the actuator but I can't find a part number. Anyone have...
  4. S

    30’ to 36’ boat owners with transom mounted transducers, I need your help

    Crappy picture but you should be able to get the idea. Haven't noticed any interference from prop wash whether trolling or steaming.
  5. S

    30’ to 36’ boat owners with transom mounted transducers, I need your help

    I as well have that same transducer set up on my 330. Only difference is I have Garmin 7612 MFDs. Both transducers are plugged into the screens so I can jump back and forth between the two. The GT56 is mounted between the engines (let me know if you want a pic) and holds bottom 95% of the time...
  6. S

    2005 330 Express upgrades

    Old thread but where did you get the rubber disks for the under gunnel storage?
  7. S

    2005 330 Express Side window Vent handle replacement

    Just wondering if anyone has found a better option for the window vent handles. I know it's a matter of time before the break (again) so was looking for a better option. If not I'll just order new ones and a spare to keep on board. Tried uploading pics but they are too big. Here is a link to...
  8. S

    New Grady owner, introduction and question

    Update. Found the sending unit gasket was junk ( as well as being super loose ). Replacing gasket tonight and will fuel up tomorrow.
  9. S

    New Grady owner, introduction and question

    Good call. I will do that. Thanks!
  10. S

    New Grady owner, introduction and question

    Thanks a lot for the responses. I’m going to be testing it out tomorrow. Fingers crossed it was all it was. I talked to my buddy who was helping me and said the sending unit screws were all loose. I didn’t realize that when we were checking. I’m confident these are the issues but we’ll see.
  11. S

    Gas filling tube clogged?

    I found after compounding one of my boats that the screen on the vent was blocked after it wouldn't take fuel. Worth a look.
  12. S

    New Grady owner, introduction and question

    Just wanted to introduce myself. I just bought a 2005 330 Express. It was repowered in 2020 with Suzuki 300s. So far running the boat has been great. A nice change from the 40' Ocean Yacht I used to have. I do however have an issue. We fueled up for a tuna trip and noticed a gas smell, mainly...