Search results

This smells like a scam. New member, no posts, and requesting you email him … beware

interesting choice. I would have gone with twins but interested to hear how it performs. im thinking you will miss the traction of two props, maneuverability etc

I've got one of those installed infront of the motors on the splash well on my 270.

I added a lewmar v700 to my Wellcraft v-20. it would self deploy a delta anchor off a standard simple bow roller. was nice when stopping off in a bay to anchor for the night or for a day of refreshments/bbqing. was so much nicer then hauling anchor by hand. you'll likely need 2ga from your...

I've just used big screws when mounting those pedestal seat bases. never needed a toggle

thanks for the picts but im looking for the OEM one with the rounded front

doesn't look like the oem Grady one. do you have any picts of your swap?

oh sheite that sucks. hopefully you've got everything well rinsed. try to spray every electrical connector with something to stop corrosion have you found the cause of the flooding? bad hose? cracked thru hull?

im looking to swap my bow rollers from the classic over the front, to the through the middle of the pulpit style. wondering if anyone has a lead on Gradys bow roller they used? looks like this one, found on the 232, some 282's and the marlin 300... probably others too. im looking to save...

I wish it wrapped around to the dotted red line

all my canvas has shrunk, or the boat has swelled, lol.... not happy with it. (in its current state or its functionality) I would actually like a one piece plastic windshield that was wider ,curved around the corner a bit so im not staring at a 2" wide seam in the middle or at the corners id...

5 more 30 day trips? thats a tough spot. re rigging is going to run you 10k in labour and parts. for a low cost fix id look for another HPDI. spending a bunch on an undesirable year (2006) 250 engine wouldn't be my solution. even if the exhaust kits were done, the block is still...

16x17p on my twin verado 250hp 270 islander

I have an 04 270. I dont understand what panels your missing. maybe our canvas is a different layout? I have two panels above the windshield, two side pannels above the side glass,..two rear panels that wrap around the rear corner then there's the three rear pannels

I got a carver cover. good heavy material, decent fit. would have been better if I didn't have radar on the hard top but im satisfied for the cost

check out boat covers direct. I got a carver cover for a hard top walk around style. just measure your boat according to their directions

you will need battery boxes to secure the batteries, and you should use agm batteries so they won't offgas. I contemplated doing this in my old boat but never did get around to it. I would use the stud terminals for my wiring. if you need small current stuff consider adding a small buss bar (I...

Ive often thought about removing scuppers and plumbing deck drains into a shower sump box with a macerator pump. ive seen more then a few sunken boats where the low in the water scuppers caused it to back flow and sink.

yes that was sarcastic humour, what model windlass is it? ive never seen one that I would call fast. makes me think that there's another problem here, and not the windlass

best way to slow the windlass down is to remove the 2ga wiring and replace it with 10ga