Search results

I’m not an expert but: 1 I would consider filling the holes yourself with marine epoxy. Will be functional, maybe not cosmetically perfect but they should be relatively small screw holes. I’ve filled in old holes like this. It’s fine. 2 a good compound followed by waxing should take care of...

04 and up is essentially unchanged in the cabin to today. Different cushion fabric is all. Looks like you can be in an 04 for less than $70k. I do like my bow thruster quite a bit around the dock, but I came from a 20 footer so this is my first “big” boat.

On my 2005 generator is behind a hatch located behind the folding aft seat. It’s in an enclosure that is its own box. Also in this compartment is the fuel selector valves, so you will access this area fairly frequently to change tanks.

I have a Marlin with the diesel generator. It’s not exactly quiet, though in the cabin with the door shut it won’t be annoying. Might be for your neighbors though. That being said, in New England you won’t need to run the AC all night. I sleep on mine at the dock and don’t even run the AC...

I went through this 2 years ago. Wanted 305, but couldn’t find one. I’m happy with the Marlin though. More of a decision on the right boat at the right price in the best condition.

Second hole was original to this boat as far as I know. Original motors. I thought about leaving the cap off but figured it would show stress cracks in the gel coat as the motors were put back on and screwed in. Cap doesn’t look too bad.

Marina launched my boat this week. This spring I had them pull both motors off to replace the aluminum transom cap (Grady calls this the bang cap). I spoke to Grady customer service about the process and they gave me the part number for the new plastic cap they use. Ordered it from my local...

I have the 225's as well. Despite what you may read elsewhere, I think the power is just fine. I comfortably cruise at 4800 rpms, 31 mph. The transom cap metal piece is a common point of corrosion. Mine is getting fixed this winter. The motors have to be pulled to do it so it's not a small...

Nice, what do you have for power?

I am pretty sure 2007 is higher than 2004-6 as well. I don’t know about 2016.

I saw a used Marlin for sale with a Kenyon electric built in to where the bait prep sink was. Very slick setup. I would like to see how much that conversion was. Kenyon is a somewhat local comapny i believe. Official grill of the Pats or something.

I went with the Pompanette T2005 for my Marlin. No flip bolster but its a great seat. Ordered from Defender. You could get the new Grady seat from a dealer but it will cost you.

The one option my Mariln didn't have was the TV. I ordered a 22" TV/DVD combo from Amazon and a locking arm mount designed for RVs. I had it installed this week and I think it turned out real nice. Wired into the DC side to watch underway without the generator. Doesn't take up much space either.

Yes, I see what appears to be the drain fitting, but not the pressure relief valve. It wasn't leaking from the drain fitting, apparently I just don't know where the pressure relief valve is to tell that it was leaking from there. The marina is putting in a new fresh water pump tomorrow as I...

Marina just called. They said it was the pressure relief valve and they closed it. Where is it located on the hot water tank? All I could see was the hose fitting for draining.

Thanks I’ll have to look for a pressure release valve. It’s a tight space in there. Owners manual doesn’t say much. I’m guessing it’s something to do with winterization. On the positive I had just dumped a gallon of bilge cleaner in so I had to pump it anyways. And now the bilge is very clean.

Filled up fresh tank for the first time his spring. I was able to pressurize and run the system, but he tank pretty quickly went to empty. All into the forward bilge. I pulled the starboard tackle drawers. Pump is hooked up. Runs fine. I see the hot water tank and a faucet fitting on it...

I struck out at autozone and Napa last year. Ended up finding some at wal mart. I’ll get the specs next time I’m on the boat. I stocked up. They had them in the car care center, not on the shelf.

I have the same charger 2005 model. I thought it was bad as it was always red. Turned out batteries were bad. Changed all 4 and it charges now. Did you check the batteries?

Yes we are talking about the same thing. I’d say definitely cheaper to recover it even if it needs new foam. Just have to figure out how to get it off.