Search results

https://www.greatgrady.com/threads/field-replaceable-fittings-for-seastar-5-16id-hose.27057/

Measure them up. Usually they only go to the rigging tubes and are metal from there to the wheel. Mine were 7' and 4' as I recall. I changed them both and they offered custom lengths at no additional cost. I'll dig up a thread.

Could try something like Alien Tape on the windshield snaps. Only going by the commercials... Not sure if that stuff works that well with small pieces though.

Just seeing this again... I ended up getting custom lengths that matched my originals and replaced both hoses back then. I think the fittings are fine for mods and end replacements. Good idea to have a set in your work bag onboard to fix a hose if needed. You'll need hydraulic fluid and to...

Great...

Sounds like you understand how they go together (like a sandwich usually fastened together from the inside). Sounds like you have a good plan, the hardest part is the execution (getting the screws out, frames separated and prepped to go back in.

Kent Fabrication in Pembroke MA makes tanks if you are south of Boston.

I got my specs directly from GW. I'd go that route even if you have them now. Better safe than sorry.

I'd be contacting Chris Carrol. If she can't help, you are going to have to work something custom.

There is a round disc that is an XM antenna connected to the stereo. There is a FM antenna as well under the cabin headliner. Any other antennas are for tv, vhf, fm booster etc put in by owners.

I think I'd be contacting Kris Carrol at GW and request executive management at GW contact Taylor Made and request that the ball be moved on this. Seems crazy that neither firm is taking the bull by the horns and getting this resolved. At a minimum GW should get a 2nd source qualified if...

Sorry for your loss. I'd search out a local dealer via GW' website. Maybe shoot GW Cust Service an email as well (they are in Greenville, NC) for some advice. Easier I'd say for a dealer to take their 10% (or whatever they get these days) to move it for you if you are not comfortable doing...

If you have access to it and are into it that deep, I'd just swap it out.

That looks like a decent solution.

Check back on this thread for contact info. This is a very old post 2018 - so you'll probably need to make contact or go to the place.

Likely not available unless GW has it. Reach out to Cust Service via the web. If not, there are firms that make them and will stencil if desired. Do a web search and you find them.

Yea, That's a come and get or just get them locally. Probably could have them made up cheaper locally.

Was talking to my dealer at the boat show and he said the screens are the biggest pain point. They rack when extending and need a lot of adjustment. His advise was to pass on them if you can.

X2 I did this. Had some left over, but rather than being short.

I'd look into a fixed mount. Glad I went this route.