Search results

I had an 04 Gulfstream and will tell you it is a great boat and handles like a much bigger rig. The boat I had was powered by a F225 and I had no complaints. I am on the south shore of Ma and used the boat extensively on Cape Cod Bay and several trips to Nantucket and Martha Vineyard. Twins...

I have been very happy with West Marine AGM in both performance and longevity

I replaced mine with one from Walmart - the only adjustment I had to do was remove the rubber tab feet. I ma not at the boat now but can get you the name later in the weeks - it was 5 or 6 years ago but there should be something clost to your needs there. Somebody in another post had said they...

I get 5 years with AGM - as stated above wire those each terminal group of wires and the job is much easier. if you don't one wire is always sure to slide down in back and then when you find something not working it a not so fun project figuring out where the missing wire is hiding!

I have an 04 SF and it does not have either of those outlets. On my boat the fresh water shower is in the port side beside the stern seat. My saltwater washdown is also port beside the live well compartment. You will love the Sailfish it is a great boat. one thing I would check right away is the...

Congrats - I have a SF and it is a great boat that you will love!

Nice job - looks new!

Maui Jim for my choice - expensive but great customer service - send them to maui Jim for new lenses and in a very few days they are back fully restores with lens and arms as good as new - flat fee covers the repair. Tough to beat theeir visual performance .

lowes sells a variety pack with hundreds of o rings for about 10 bucks

I did the s I did the same swap out 3 years after 17 years. let's hope we get 17 out of the new one!

Does your boat have a refrigerator?

I had a similar issue a few years back and started giving the terminal connections a good cleaning and tightening each year before launch.

It was a couple years ago and it was around $1,000

Isotherm refrigerators AC/DC models are available at West Marine. I got an exact replacement from them 2 years ago and they are now AC/DC. The original ones were DC only so they were battery only The new ones sense if AC is present and convert to DC automatically when not connected to shore...

Went through this search a few year ago. I just removed the other vent and brought it to a glass shop. The shop sent the template of the window out to a supplier that does tempered glass and 5 day later back in business - not cheap around 125 buck as I recall but it fit perfectly.

Here is a copy from a 2014 306 - not sure if the layout changed for 2021s. There are also diagrams for washdown, livewell, discharge and freshwater systems in the 2014 manual if it appears to match your boat.

I just went through this with a 2004 Sailfish. Checked dealer and they no longer have those blades and they said I would have to replace the arm and most likely to motor since the arm was on there for 22 years. I ended up checking a few auto part stores and Napa had a blade that fit - it is...

it may be just to tight - you can use a big flat head screwdriver in the fitting to loosen it a bit.

Friendly and an incredible amount of balanced experience / knowledge sharing. What are the issues - technical based?

I have the same light and I just use a broom handle to reach the light and just push it upright. I never tighten or loosen it and it always stay in place.