Search results

I went through this, found a set, kid dropped 'em overboard before I got a float on them...

That's the problem with guessing. I think the ones guessing windshield height that high are including the eisenglass?

As she sits in this picture on 15k Venture, 10'7" to the top of the windshield, 13'2" with the hard top, and 14'2" with the radar. I used to be 14'6", but I adjusted the trailer bunks... These measurements taken just now with a straight edge & 6' level, no guessing. The hitch height is at 22"...

Where are some good sources to find .125" stainless angle? I have my transom apart and prepped, but all I can find is .25"... I don't want to space the motors out.

Do you still need a measurement? I can measure mine, it's in the driveway, but other trailers may vary.

I didn't attempt; 282 Sailfish dry weight is only 5,800 lbs, motors prolly add another 1,900 lbs, so below the required 5 net tons...

That work with 4200/5200 as well?

Not an emergency though... Order them and do them next time you are doing maintenance.

Yeah, put it together and set it on the shelf... I need 2 power heads, or need to get busy re-building them.... Haven't found a machine shop to take them on yet.

2 L8!

I can't believe it's taken this long (since April), but after parts chasing for days, then multiple back-orders, look what came today!

Off topic, but, buy yourself a nice 8' or 10' step ladder and get rid of that POS before somebody takes a header and gets hurt... Ladder needs to be higher than where you are headed. Trust me, the fall doesn't hurt; the landing does!

I would say so; 5,000 btu window units are normally good for a small, 150 sf bedrooms which are also 10' high, so...

Bump... None of my leads have panned out... Any others? NC? MD?

Have you done it before? Results?

Free one from a boat show & 4200...

I'm looking for a Yamaha Dealer/Mechanic that also has Machine Shop/Welding capabilities... I am in Prince George County, VA, but power heads are off the boat so I am fairly mobile; looking for recommendations anywhere between Richmond, Hampton Roads, Norfolk, VA Beach area. Need to have...

So, Hampton Roads/Norfolk/VA Beach area, anybody know which Yamaha shop might be able to weld them up?

Finally got time to pull the Port side today... More of the same. Decisions to make because I can't afford to re-power with new motors. I have to either have them welded up, re-build with new blocks (how much will that cost, parts only?), or find a pair of used power heads without this problem...

Had a little break in the action due to work. Pulling the Port side today...