Search results

Well hooked the red to power. Black and white to ground. And the brown to the pink wire on the back of the gauge? Seems to be working. Not sure what the gray wire for ignition is for? Or where it goes?

Seasick, I have all hooked up now but the optional fuel qty. I have the wires for the qty now pulled up to the back of the Yamaha gauge. I know my looking at the GSF 10 install print the black/white wire goes to the ground, the gray to the ignition and the brown to the fuel sensor. My question...

Sorry to hear. I have a Voyager 248 and tow back and forth to Southport NC to Greensboro NC. Have the same issue with a bridge on US 70 just to the east of downtown GSO Less than 14 on one side and the other 13.6? I have always gone up the off ramp and down the other side. Always had the fear of...

Yep has an option to display on the Nmea 2000 hooked to the Garmin 741XS.

Thanks the power for the GSF 10 has to be hooked up. I have run the wires as I mention to the sending unit. would this be correct or should i pull up to the gauge and hook up? how would i get power at the sensor? only have the center connection and ground wire on the sending unit.....

Im going to call Garmin tomorrow but thought you guy might be able to help today? the Garmin install instructions are ok for installing one thing but when you start adding it gets a little confusing? If I hook up the GSF 10 to a Nmea 2000 back bone that has power do i have to hook up the Power...

Really??? I have had all my new Garmin units, fuel flow and Qty transducer radio and NMEA 2000 kit and its raining all week or cold as can be? I guess ill have to shop for more items. the wife is going to kill me????????????? she is starting to wonder why the UPS man is here everyday..............

nice, best feeling in the world. Cup of hot coffee sun rise and fish on the horizon................

gradywhite248 Steve 1999 248 Voyager 2000 Yamaha XO 66 250 2 Stroke.......

Yea haha tried to turn off the music before and I had a Mutiny on my hands :<><

sounds like a great play list. I'm installing a Fusion radio as we speak. This past summer unfortunately I don't listen to much music while fishing due to the fact most of the other cursing trips I have my wife with her friends and my young daughter and her two 13 year old friends. The music...

Starboard as mentioned above :sorry guess i should read the responses closer. Will post photos when done.

Hey guys Have all my units to mount now and still looking for the material to use in place of the original Plexiglas door. Looking for either the black or white and how thick? :huh

Thanks you, you are correct on the transducer. The way you mounted and where sound like what i would like to do? The one question I still have is will the GSF / 741 still hold fuel Qty indication if i power off? a few on the web seems to be a little confusion? I would think the Garmin 741 would...

OK have all the NMEA 2000 parts to install. I have the starter kit (Garmin) the GF10 for fuel info and the 741XS with the chirp transducer. Where are you guys installing the backbone for the NMEA 2000. I have a 1999 248 Voyager with a single Yamaha 250 so Im thinking in the back bilge area by...

You are correct it does have an internal antenna. I have been told if you flush mount the unit you might need and antenna? not sure if that's true? I guess like a car GPS. Sometimes it does not work, if I don't put it on the dash... but since I already have a preexisting GPS antenna I was...

try the Grady site http://www.gradywhite.com/downloads/#manuals they have all the manual at the end they show wiring prints? Good Luck

Quick question. Still looking at installing my new Garmin 741 and since its to cold I ordered a few more items to install in the NMEA network? First I ordered The GFS 10 tracks fuel flow and fuel on board to your chartplotter via the Garmin NMEA 2000®. This is going to give me the ability to...

The only plastic ones i have are the ones you see in the photo above on the left side of the transom. One just like it on the right side (hole). There is a hose off each that loops around and goes to the plastic fitting down by the waterline up in the Trim tab well. The one in the trim tab well...

Thanks. I have put the greatest repair on it with Haha duct tape and will seal with the 4200 when it's warmer. I was looking at today and it's so cold I just touched one of the hoses going to one of the plastic thru hull above water fitting and it just snapped off. Time to replace all those...