Search results

Re: ProMariner ProSport 20 Generation 3 20 Amp, 12/24 Volt, Thanks.

Sorry for all the questions going crazy from the cold. Anyone ever use any kind of spray covering on these rough arm rest. Like truck bed liners.

Re: ProMariner ProSport 20 Generation 3 20 Amp, 12/24 Volt, Oh yea two batteries and no shore power. Wish I did

Re: ProMariner ProSport 20 Generation 3 20 Amp, 12/24 Volt, Thank for the follow ups. Really not in a hurry just a long list of items to order with a limited time. Let's just say the UPS guy and I are on a first name bases. Amizon is loving me. I'll go with the one above. Really cold in the...

Family Affair. I have a 1999 Voyage delivered in Aug of that year and was curious about how I would know whats under my transom cap? I have one edge that the screw has pulled thru? No cracks on the transom so I really not sure what to do? would like to remove the cap and seal the gap but not...

Re: ProMariner ProSport 20 Generation 3 20 Amp, 12/24 Volt, There has to be a few of you guy that have installed a battery charger? any thoughts???? :huh

Looking to install battery charger any recommendations? is this a good one?

I too compared the two and also bought the 741 for the same reasons mentioned above.

went a head a ordered one on Amazon, I don't tow more than twice a year but each way is 150 miles.....

OK, Maybe I'm missing something but how do I access the aft starboard area inside the hull above the starboard trim tab? Not sure if i remove the batteries i can get there. Actually looked at back during the summer when two rubber handles came off a brush stored in the cockpit side wall and fell...

Thanks good advice on the trim sender.. If it can be done wrong you can bet i might do it!!!!!!!!!!!!!!!!!

What kind of transom savers are you guys using? With the Grady 248 you have a step hull and the trailer is at least 5 feet from the engine, Does this M y Wedge work? Looks like it only takes the load off the tilt trim system? same load on the transom? http://www.m-ywedge.com/

Here are some photos that might help. This sensor was installed before i bought the boat by a Grady dealer for the Furuno finder with temp and speed, Im still unsure where the Yamaha gauges get the speed info? Hope these help. I like the way they drilled a hole above the water line as you can...

Damn!!!!!!!!!!! Since I have bought my Garmin 741 and not the transducer how do I get that view...... Please advise that is great

I'm really not sure. From what I understand it will for sure deteriorate the threads in the cushions an dull the gel coat but not sure someone might key in on that. In my case i bought my Grady from someone that always stored on a lift at the coast with a cover on it and was never cleaned in the...

Yep, In my case I have to do a complete buff and wax this spring and with all the cushions removed thought I would give it a shot, vinegar was not working to well. Thanks though, Lots of great help on this site.................

Plenty of room for kick up. see photos. I'm leaning on leaving the original...

Just bought some Zep from Home Depot. Only about $2:75.... Sprayed a few spot on the Grady in the rain and boy what a difference... Works great.....

Great thanks for the help. One quick question. I believe the Garmin 741 will give me boat speed with the GPS but if I install the GT20 transducer where will the factory original Yamaha gauge get its speed information? Should I leave the already installed transducer on? It has a little wheel that...

Nice really looks clean with extra storage behind, Which transducer did you use?