Search results

What year is your 330? What does the manual indicate?

We don't/won't know how your boat is wired. The manual does a decent job at displaying how it was wired from the Factory. However, my experience has been that people do weird things to boats and especially wiring. My best advice is to pull up the access panel in the transom, and the battery...

As other's alluded to, these are often wired to an accessory switch on the switch panel. Make sure that any accessory switch is "on". I can't tell you the number of times the aux switch has been inadvertently switched off by me or a crew member.

3.76 @ fairhaven shipyard on Sat; SeaFuels across harbor in NB is usually a hair cheaper.

Closing the loop. Installed the new props on Saturday. Took for a quick test run afterwards. Before changing, boat ran 30 miles an hour at 4600 at 1.0-1.1 on the Yamaha gauge. After changing, boat ran 30 miles an hour at 4300 at 1.2 on the gauge. At 4600, she ran at 33 miles an hour. So...

Agree with half hitch. My repower was almost 70k, not a chance that I'll not use the Yamaha filters. There are places to cut back and save in boating, but IMO, this is not one of them.

Look up in the Sticky threads at top of forum. Make a small donation, and magically, they go away.

I did as Freedom did and purchased through Cape Marine. We have both a floor mat and the over the gunnel mats and find them helpful. Both are about 5 years old, and still holding up well.

Bell is not needed in MA until over 40'. My 330 has a horn, and I also have whistle on a lanyard at helm, plus a canned horn.

I did reach out to Ken at Prop Gods, who confirmed that the 15 3/4 x 15 would be the best choice. Now to find a pair.

Thanks @HMBJack and @wspitler exactly what I was looking for. Cheers, and here's to a good season.

No, the old motors had a completely different gearing.

Repowered my 330 last year with a pair of new Yamaha 300's, for last year, we opted to retain the 17" props from the old 225's. I was able to trial a pair of Yamaha Saltwater Series 2 props in a 15 3/4 x 15 configuration and found significant increases in performance and economy in the mid...

Thank you very much.

I don't know as my donation was just done, still seeing the ads.

Just donated. Love the site. I would suggest seeing if there is a way to tone down the ads to a degree. They were way too intrusive, coming up almost between every real post. If this continues, there is a great danger in losing members, and driving away potential new ones. There has to...

Offhand I don't remember where I was able to find them, but I do recall being shocked at the cost. It would be an improvement, but for me the value was not there for the asking price of them. I opted to use a medium cooler in that spot for the footrest instead.

As others have said, LED is the way to go. My guess is buying just a lens is going to be costly, if it is possible. Might be possible to source a complete old light someone removed. But, why go through all the work and effort to end up with 20 year old technology again? LED spreaders are...

Where are you located?

Wait - which one of my crew are you? LOL