Search results

You would think this is easy but I cant find any hardware on the inside of the gunwale holding the bolsters. Any ideas??

Thanks so much. Let me know the new phone number and if you could give me his name that would be great. I went through all those junk yards last week and the roads there are like a 3rd world country. Lou

I tried to see Skillman Upholstery in Corona Queens but he's not there any longer. Some other shop bought his tel # and is in a different location. Do you have any other ideas how I can contact him???

thanks for your help. do you know if they will use marine materials like open cell foam, dryfast, etc?

Hey Seasick, thanks for the reply. You are in my area. Do you know of any shops that can do this well? I travel the tri state area for my sales job and I go everywhere....Thanks....Lou

Any idea about having these recovered? Grady does not make the replacements for my year. Thanks....

what about the noise comparisons?

I also have a 2003 Grady 228 and love the boat. It is definitely butt heavy and the main gas tank should be glassed in as far forward as possible instead of where Grady normally puts it.. The aux gas tank could go behind it but I think if 90 gallons of fuel can't get you where you want to go...

Actually the 225 or 250 is what I would be interested in. I have the old 225 4S weighing in at 685 I think. Any idea what the new ones weigh?

Has Yamaha introduced a new 4 stroke series that has the same or less weight than the comparable 2 stroke motors?

Sounds like oil pump is not moving enough oil or low pressure at idle. Could also be the sensor. Obviously check it out and report back.

Lewmar Profish 700 I have it and you have the option of freefall or power down. Try Defender in CT for best $$.

I worked on my rub rail and it came out better than great. I used Vinyl Lux solvent #355. You really have to work it in, not just wipe it down. I used a rag but maybe a scotch bright pad would have worked better. I had to rub over a 2 foot section maybe 15-20 times with a towel that was wet with...

some great ideas here guys.....

what is 303? someone told me Cetol?

If you mean "Armor All"...it sucks.... There has to be something a bit more heavy duty.

What is the best way to rejuvenate my blue rub rail? It's starting to look a little sunburned....

use a cheapo red or green marker that is NOT waterproof and draw some lines around the bilge or anything that you suspect of leaking. The ink will run...

The cockpit shower head on my 228 is sticky when I depress the button for water. I tried to take it apart to maybe clean it out internally or spread the spring out but I can not figure out hot to open the head up? Any Ideas??

I have an 03 228 225HP 4/S with the exact same issues. I'm not sure but I believe that Grady put the main fuel tank as far forward as it can go and decided to eliminate the aux fuel tank for more current year model. My local fiberglass yard quoted my $2,600 to move my 92 gallon tank forward. I...