Search results

It did make it tight in the cockpit. Add a larger cooler for fish box and any more than four people in the back of the boat was difficult. I have since removed the chair. I use beanbag chairs for the clients to ride out and in on and they go on the bow while fishing. Makes fishing a lot easier.

There is a 1/2" aluminum plate mounted into the underside of the deck cover. Through bolted with three screws so taking it in and out...not an option.

There was a battle station in mine when I bougjt it but changed that over to chair. You can see it in the pic below.

Congratulations on the new to you ride. I have a 94 model and yes I too have one of those little boggers broken. Don't miss it much to you start running into a head sea and you pound a time or two. They at least keep the switch covers from flapping. I'll be following to see if anyone might...

If Grady customer service can't help you, give the folks at Boat Steering Solutions, LLC a call. They are some very helpful folks and also a source for the flexible hoses. boatsteering.com

Pretty much. You can slow down the cure by placing in an airtight bag and placing in the refrigerator. But, in the end, it turns into a rock.

I'm impressed by your persistence in finding out the details concerning the hull. However, I need to ask...have you questioned a competent mechanic on the cost to re-sleeve the 225's? I was quoted $7500 per engine just this summer on a pair of 04's. Just be prepared on all you're going to...

Just a thought...my ac unit is mounted behind my frig so space for what you want to do should not be a problem at all. You could still keep the frige if you like.

Just for giggles...make sure that the port side fishbox/cooler doesn't have raw water plumbing inlet high up in the front side of the box. You will have to stand on your head to see it if it is there.

Man, do I feel so much better about myself. Thanks ;)

Late Again Grady Keith '94 27 Sailfish w/ 2021 transom twin 2021 Mercury 225 V6's

I did. They suggested I go to my local Grady dealer that they would be glad to help me with possibly finding a supplier. Yeah right. Been there, done that, got the t-shirt. My local dealer (service dept) doesnt want to do anything other than warrenty work. The other have of the dealership...

272

As the title suggests, I'm trying to find another plastic insert for this water faucet. As you can see this one is starting to crack up in both of the bottome corners and has become quit brittle. Any ideas or suggestions??? Thanks, Keith

Stow it down below. It may be able to handle the wind but that is a lot or resisitance bucking the wind while towing.

Correction, it's a B117. It's highly possible, but I wouldn't think for long periods of time. Boat stays in a slip most of the time. I do remember one time when putting boat on the trailer the unit was left running. Might have run 15-20 minutes out of water. Guess it's time to change out the...

Thanks for the replies everyone. I believe the ducer has gone bad. Can't null it out, not enough adjustment capability in the machine. Running a Lowrance HDS2 with an Airmar B175 (I believe).

New to the forum and as the title says, I want to try to remove the bottom paint that is coverng the lense of my transducer without damaging the transducer. Sonar unit began shown water temps about 15 degress hotter than actual. Hope removing the bottom paint may help. Anybody have any...