Search results

Do you have power at the fuse panel under the dash?

Go with the hardtop rocket launcher as it will keep the rods up and out of the way. When I bought my boat it didn't come with a hardtop mounted rocket launcher. I actually thought it was the only grady express without one. I ended up ordering one from winterville machine works who makes them...

Windlesses make life so much easier when anchoring. I would never own a cabin boat without one. You have a common boat, there are a lot of pictures out there of them, look where the windless is installed on other boats to give you an idea of the best place to put it. You can also call up a...

I just have 2. They light up great though. The problem is they are directly behind the engines, so with the engines are down a lot of the light gets blocked. I bought the boat with lights already installed that way and just updated the lights.

Go for it. Do it while you can and enjoy. Upkeep and Maintenace is not going to be much different than your current boat.

I have them on my express. They were replacement for the original UW lights which only lasted a few seasons. 5 seasons so far and doing well.

The good thing about the 265 is you have good access to all the pathways to run wires. You just need to unscrew and remove a few panels. You have plenty of room to mount stuff in the helm electronic pod. I had a simrad AP with the pump mounted behind the drawers in the cabin under the...

We use bean bags on the bow for lounging. I also had cushions made for the bow which my wife much prefers. The downside of the bean bags is storage as hey take up a lot of space.

heat gun and a razor blade worked for me. Never replaced the stripe as I prefer the cleaner look.

My battery/charger system is similar. I leave it plugged in all winter.

With the trim tabs off the transom, won't the swim ladder hit the starboard tab?

a bit pricy

Every marlin I have looked at has had the tabs flush to the transom and the actuator in a recessed pocket. Most of these boats were 2000 models on. Maybe the older ones had them on the transom?

new doors look great

I Installed a Garmin smartpump and reactor 40 a few years ago. I did the majority of the install, but had a mechanic friend help with the hydraulic connections as I had never done those before. Pretty straightforward install. It is the best autopilot I have ever owned. Holds well in all...

I'm cheap and traditional dock boxes are not allowed, so I use a big cooler.

The only problem with the stick or spike anchor is that you have to be out of the boat to deploy it rather then just tossing an anchor. If you are in an inland lake or very protected area this may be no big deal. Where we typically take the boat to the beach there is wind, current and tide...

On a 25 year old saltwater boat I would just replace the through hulls while you are in there replacing everything else. In this case I think It will be much easier to break things to get them apart then trying to futz around with old parts to try and save them to re-use.

In our marina there is plastic triangular piece between the main dock and the finger just like you drew in your picture. That is where some people put dock boxes. So if your marina allows it that would be the place for it. Our docks are floating, but not sure it really matters. The dock...

I have a gas tapper 12v gas transfer pump. Not very fast but works very well for pumping out fuel tanks.