Search results

Hmmm. This isn't making sense. If I'm reading your post right, you are saying that, for example... if you have a nearly empty tank, and you pump 2 gallons into it and then release the lever that fuel will spurt out at you?

Read my post.

The brown color looks alot more like wet wood color, to me. If there's wood in those holes (did you look inside or even just look up underneath?) - then that explains it - simple enough, water gets behind the bolsters and wicks in.

Morganzer... yes, if your calculations show that 6g is fine for the rount trip (+ & -) then although it "feels" weird to then connect to 12g, it's fine. The windlass can use 12g because it's "round trip" from where IT get's it's power is only a few feet. It doesn't care how far away the...

Nice to meet a small percentage of the population! :) Interestlingly enough... your Merc 4-stroke is about the same weight as an older Yamaha 2-stroke. It's kind of amaazing that Merc can get their 4-strokes so light and still have something amazingly reliable.

Sure! It's all pretty easy to do, but I know what you mean. Sometimes you just need that little push in the right direction and then CLICK... it all makes sense. Do you like spaghetti? That will make sense soon........... :)

A good penetrating oil will absoultey wich uphill. But I wouldn't expect it to work magic - and certainly not within a day. It may take at least a few applications over a few days to even have a chance of working. Can also try... -- Tapping the top with a hammer to "shock" the corroded bond...

Fishing... I always thought it would be way too awkward to get the spring off without removing the arm. Good for you! Adding onto what Hookup said - that allows to switch to a J-hook connector so can buy replacement blades anywhere

Oh, that stinks. The other thing to do (which is still quite easy) is to use the wire color code as that will tell you what each circuit is. EDIT: I see Hookup already did the majority of your homework for you

Sometimes this info is in the owner's manual. Check there. If you don't have the paper copy, you can get it on GW's website.

:) Stbd side.. yes, I completely agree when an outdrive/outboard is mounted direct to the transom. However in this case, the OB is mounted on a bracket so it's quite a distance away (forward) from the prop disturbance. So in this case, the port side is just as good.

If it's only doing it on tight turns, you don't need an extra 5". That would be too much. Check what hole they're mounted on and also look at the anti-vent plates compared to the hull. FYI... it's "ventilation" not cavitation. They're two entirely different things. Yes, Seasick, I'm not...

Oh, is that what that transducer that he has is? I guess his installation directions would probably tell him :) "Wrong side" - that's funny. It's funny because I KNOW that you are being sarcastic (joking) with that statement!

Big... it sounds like you might be getting lot's of information from various internet searching that doesn't always apply to your situation. Focus on the installation manual that comes with the unit for the most accurate info. For example, the "15 inches" statement does not apply in any way to...

From evertything you wrote (which was a good description), it sounds like you're in the water too deep. You don't need the stern to actually float... just sort of barely begin to rock a bit. Change out the carpet to plastic and you'll make sliding on/off a whole lot easier.

Good deal! I once rebuilt my trim/tilt unit for my 250HP (internals, not just simply the seals). Once. Never again. I would gladly pay someone to do it!

Doesn't matter. Use a socket extension/wooden dowel/etc and a hammer. Did you previously spray it with something like PB Blaster?

It's not a "bolt" - it's simply a single, large pin that goes all the way through from port to stbd. Push/tap it through.

Lucky, do you have tabs and use them? Consider adding larger tabs - that will absolutely make a difference and it's also low on the $$ scale. When increasing tab size, span is more important than chord. Point of clarification... you do not have a displacement hull. You have a planing hull...

You'll want to add more detail... Max RPM's? Prop size? Hull clean/dirty? Even just a light layer of slime will cause a major loss in performance.