Search results

On many GW boats the installed charger has a switch. I have missed that a few times. That would be something to check initially.

Don’t remember right now, away from the boat but will try and check when I get home next month. That part number sounds familiar though. I thought I had a pic of the part number on my phone, but can’t seem to find it. The part number is near the base of the actuator if you can get your camera close.

If it is like the 330 express the bottom of the actuator is behind the Ac/DC switch panel in the galley and can be accessed by removing that panel. The box can then be manually lifted and disconnected at the top the actuator is not hard to change. Had to do it on my 330. Use care not to run the...

A lot of people use GE silicone II in an almond color.

Don’t know for sure! I’d look at the ingredients to make sure it’s not petroleum based.

I always use a silicone paste which is fine for metals rubbers leather and all synthetic materials. It is relatively cheap if bought by the jar. May be difficult to find out exactly what type of material the O-rings are made of but paste works well on all rubber parts. I use it liberally on the...

I upgraded my 330 with dual Garmin 1243XSV MFDs. In addition I changed my radar to one of the Fantom solid-state radars. I previously had one of the older magnetron 18 Garmin radar and it was not nearly as sensitive and had less functions.The functions are amazing and easy to use. As an old...

I’ve noticed the improvement in types. not being a early adopter of technology, I’m a little afraid to set my boat up that way yet. Another couple years I think it might be a great idea! The prices continue to come down as well. I’d be very interested in what you decide and how it all comes out!

Make sure you do your research, most of the LIFePO4 batteries are not able to be used as starting batteries. There are a few that are capable of starting but they are quite expensive. Installing the appropriate charger downstream from your alternators is also a bit pricey and the finished...

That appears to be wired directly to the battery circuit wise., but I understand now why you said via the battery switch. Can’t tell for sure. In other words it is hot all the time and position of the battery switch does not turn the bilge pump off. They just use the terminal on the switch that...

Minor correction, most manufacturers, including GW wire the bilge pump/float directly to the battery (buss) and not through the battery switch. You want the auto function to work, regardless of battery switch position.

We need more information as to what is actually driving your transducers. Do you have a separate black box to drive your through hull transducer? What type MFD is driving your GT 56? Many MFD‘s such as the 1243XSV, will not drive two transducers simultaneously. If your MFD has only one...

I am extremely happy with the performance and reliability of my Lewmar pro fish 1000. It is very important to have the proper size gypsy, chain, and rode. I prefer 8 plait rode as it lays much better in the anchor locker.

Go to the sternmate .com website for a lot of good mounting advice. Ideally I believe the transducer should be parallel with the sea bottom depending on the angle of the boat but placing a straight edge along the bottom of the hull with a transducer 3/8” below that straight edge should be close...

I’d sell your F225s while they are running well, take videos, offer test runs and get YDIS readouts. They are valuable to the right buyer. Keep your controls if price sensitive and repower with new F250s. I sold 1200 hour F250s running great and repowered with F300. Market is not what it was...

Try going to your warning manager and reset the warning message. You can find it in your Garmin owners manual. You will get all your engine warnings through that system as well.

I think it’s the nature of the beast! Haven’t found a solution either. Vintage fishing boats used a spanker sail aft to prevent that.

Go online and get the installation manual for the type of command link gauge that you have. There are several types. They are readily available!

I forgot about the accumulator. The newer pumps do not require an accumulator. Even with an accumulator the main water tank is not pressurized and accumulator is on the pressure side of the system.

Pressing both switches is fine! That is exactly what occurs when the tabs auto retract.