Search results

I've have really been thinking about flush mount in radio box, would be different looking a bit up vs glancing down but I can fit a larger screen in the upper

Looking for ideas how people have mounted there Electronics, Iv got a 2006 228. Looking at possibly mounting a Garmin 7610 in upper electronics box and may be a 8 inch version at the helm, any or all ideas would be great

why cant I post pictures from my desk top

I will see if startron is available in Canada

does any one know if PRI-G is available in Canada , tried a few spots with not much luck. THIS stuff is used and proven by you guys, think I would like to start using specially if it helps cleaning injectors. I also run Yamaha ring free in my f250 4 stroke Yamaha

yes sorry 2006 228 with hardtop

to mount my electronic in hardtop and electronics boxes looking for ideas

1/2 star board for mounting ???

been looking for ideas also would like to get to Garmin's side by side and leave the lockable hatch and ideas would be greatly appreciated

DennisGO1 have a look in the photo section at the 232 full restore, there is an anchor bow protector , cant really tell how its mounted , 5200 maybe ??

having trouble posting pic some work some don't, cant get jpg off my desk to work

Its actually grady who calls that roller on the 232 and larger vessels the chute and the fairlead is used on the 228. I must be miss understanding how you guys pull , you either pull from the stern or the bow, in a big swell there is no way im pulling from the side cleat, you will turtle your...

will send some pics so you understand how we pull with the sliding ring and large scotchman

im sorry but every one pulls this way in the north, , I wasn't asking how to pull the anchor . I was asking about the roller, we have some times 450 feet of scope out with big currents and 20 foot swells the chute type of roller works better as it closer to the boat not another foot past the end...

Cant seem to get my pic to load. Have done a lot of these installs. I would be very cautious about mounting the kicker which weights about 110lbs to the 228 swim grid its only lagged to the transom, try to mount kicker as close to center as possible so you can turn comfortably in both...

Yes I know that is a plough its just a pic of the standard Grady chute roller , mine is a Bruce , doesn't matter its the roller dimensions im after , they are call chute type, I have the standard 228 roller which extents past the end of the pulpit, we use scotchman to pull our anchors because...

looking for dimensions of this ss roller

thanks I will have a look

I do a lot of anchoring in fairly deep water, with an average 250 feet and use the Scotchman retrieve system. Have been looking at the 232 Gulf streams pulpit roller the chute type which carries a Bruce anchor perfectly. Looking for some measurements and pictures to all you 232 owners. Is the...

Re: Complete Restoration on a badly damaged 2009 232 Gulfstr totally beautiful boat, wonder how the got the anchor hull protector to stick doesn't look bolted, 5200 maybe