Search results

I'm waiting for Garmin to come out with a competing system to the Furuno Omni for the small boats (under 40'). The PS70 is pricey but would be OK if it really worked. I don't need the bottom mapping. I'm looking for fish. Some of the comment/reviews indicated it worked for them but I'm not...

Anyone using the Garmin Panoptix PS70 Transducer on their GW boat? Been watching this scanning sonar evolution. Trying to figure out if the technology really works and if its worth the $5k.

I have 2006 F150's. Yamaha had a problem with the harmonic balancer. The gear was wearing and shedding plastic into sump. Potential self destruct. I was out of warranty but replaced them anyway. Motors have 2,500 hours on them now and run like new. Have a Yamaha tech check it out for you.

It's something I see with all older GW's (including mine). The bang caps leak and wood transom get's wet. Just because the transom is wet doesn't mean it is falling apart.

Get a good look below the rub rail. Put a picture up. Typically water gets into the transom from the bang cap. The freeze/thaw will cause the top of the transom to swell. In this photo you can see the fiberglass cracked. The corner was opened up to clean up the loose filler and repaired. That...

My Group 34M AGM is under the v-berth with a Noco charger.

Smart move. Lighter weight. The other consideration with the other batteries is that they would have to be AGM's. Regular batteries would out-gas and create an explosion hazard if they were mounted in a interior compartment.

The stainless wire does work its way out of the piano hinge. It doesn't usually get lost. You can push it bac k in. You can order stainless rod from McMaster Carr (probably 1/16") Maybe get hobby wire from K&S. Use a little Loctite blue to keep in place.

Sure. There is always play in the rod holder. Get over it and fish. Those bait boards never fit tight. What are you worried about?

So where are we all at with helping you with your problem? It's not a conversation if only one side responds. Help us help you!

Where are you located? Maybe someone can get you a someone to polish that tank. But keep in mind a 25yo aluminum tank is about due abused or not.

No. Lined microwave box to make a tackle cabinet. Eliminated front windows and patched inside.

If you are telling me this stuff is on the bottom of the tank then it is separate from the fuel on top. Are you adding ethanol fuel to a water contaminated tank? Then sure you are making more water in the bottom of the tank. It’s called phase separation. When you stop for a while it will drop...

Did your receptacle accept the #4 wire you ran? It true that the receptacle/plug are only rated at x-amps. Because of the length of the wire runs they are upsized. Nothing wrong with getting maximum copper contact on the terminal inside the receptacle. But you have to work at it.

Google Marine Headliner material. Foam backed is what GW used. Get something with some stretch to conform to all the curves. 3M spay contact cement adhesive from Home Depot - regular or heavy - either one. Messy job. the reason the headliner is coming down is the foam backing has broken down...

I just finished replacing the Hubble rec receptacle for the dredge reels on the tournament boat. Two new Lingren-Pittman 24-volt reels. Existing wire is #4 gauge. Difficult connection to make to receptacle. You may have same problem with trolling motor connector. The Hubble HBL328DCR receptacle...

As said look at the frame or other side. Probably 1/4". Glass guy I spoke to and canvas companies have been using acrylic instead of polycarbonate. Acrylic won't yellow as fast from UV damage. Acrylic can be heat formed as well. But its not as "bulletproof".

Did you drop any pitch when you changed? Some guys won't do it because they think they will loose top end. If props loaded wrong it can be significant improvement. Ken ran my numbers and recommended 4-blade props, 2" less pitch and slightly smaller diameter. Complete game changer. Boat as a 10...

Go with #4 to be safe.

Have you tried 4-blade props? Worked for mine.