Search results

New pics by request

Hey I'm lowering the asking price on Beast of Burden - a one owner super clean 2016 330 express with lots of great options. Yamaha 2x300s Engines had 300 hour major service at about 275 hours and are still under 300 hours. Handles great with twins and bow thruster - does not have a helmmaster...

Update - project completed. Just in case anyone runs into this problem - the inlet comes thru the transom and is accessible from the inside. By removing 4 screws the valve will detach in 2 pieces without having to do anything on the outside bezel. The valve was full of crud (probably dried...

Hi. Looking for some advice around my city water inlet on a 2016 330 express. I've noticed the onboard water pump located midships cycling when 12v waterpump powered but not in use. So in searching for the leak I found the shurflo water inlet for the city/marina water leaking inside the stern...

Sounds good. It will be easy to see once its back in the water (October 27+/- a day) and behind my home.

Pictures and description as before plus see most recent post. Apologies for redundant posts but Having some difficulty posting using mobile app andiphone

Reducing price to 269k. Boat was for stored for 5 month hurricane season last 2 years. still under 300 hours. Will be splashing it end of October and can be seen in Palmetto Florida. Will consider serious offers !

The helm enclosure needs a good scrub and has clouded a little but is in nice shape for almost 9years old and keeps the helm nice and clean. Rolls up easily in 3 sections for cruising. Took the cockpit pics to show the new bolsters and flip down seat recovering ($1900). Picture also shows the...

Forgot to include location - I am in Bradenton FL. Would also be interested in any service facility I could drive to within a couple hours with a good tech.

My Fischer Panda Genset is about to hit 100 hours. I did the 50 hour oil change myself and used the dealer for a warrantee repair a few years ago but I'm hoping there is a mobile tech who might come to do a more comprehensive 100 hour service. I've called a few of the mobile diesel outfits...

I was asked about the need for replacement of interior upholstery and cockpit bolsters on this boat. Regarding the interior seating: I have seen this in a number of Grady 330s of similar vintage. I was told by the upholstery shop that the seat fabric was likely degraded by exposure to...

Correction: the dual Garmin screens are 7612's I.e. 12" not 16". And as long as I'm posting again a few more options were the command elite helm seat, underwater lights, and I just had the interior seating areas and cockpit bolsters recovered (3K). Thanks

I bought her new in 2016 in Tampa Florida area and have kept and used her there since. It has never had any type of damage - stormwise or anything else. This is the AV2 hardtop version with full windshield and sunroof. The twin Yamaha 300s have 260 hours. The Fischer Panda Genset just under 100...

The sureshade control on my 2016 330 Express is located on the starboard cockpit side behind a starboard panel. I think its the same panel to access the hot water. I've played with that control panel quite a few times to get my shade to extend evenly and also contact the upper hooks with the...

Brian. I did that on my 330 once shortly after I bought it. It was something to do with the "duckbill"? flaps inside the vacuflush system. The tech accessed the pump from the starboard side of the midberth by removing a panel and had to "reset" the flap back to the correct position. Sorry I...

Hi and thanks to everyone who responded to my inquiry. So I had to take the boat in for service to the yamahas so I explained the genny issue to the service writer. They don't have a genny tech on site so they arranged for a visit while it was in their yard. So it turns out there was a bad...

What year is your 330? I had to replace the sump pump on my 2016 330 and while the box is easy to get to the pump change was complicated by the fact that the old pump was discontinued and the replacement required a higher amperage breaker in the panel. If it is only the float switch however you...