Search results

Thanks. Bob's is still there, stop by often. We've had very good success off Deer Island and just outside the harbor. Will def check out the other spots as well.

Yes. Love the tent set up.

I'd say with the recent redesign, there may be more for sale and prices may be a tad lower. Honestly who knows, but the 34'er is a nice layout.

At least it is manual. I hear nothing but bad things from my dealer with the motorized ones. Seems like every time I see him the topic of staying away from them comes up.

I'd be fine with it. Run it and see how it goes. It's not a critical failure mechanism so don't sweat it too much.

A bunch of folks have. Search the Mod/Upgrade section. Its fairly straight forward. You need to pay attention to what is under the gunnel and make sure where you drill has sufficient back side room, You should use backing plates if possible, any size will help. Get the right angle for the...

It's a short term resting situation. I doubt you'll have any issues.

Todd and Garelick make some decent small seats. I'd want to touch and sit in anything before buying. Could look at leaning post options as well.

Mine is pretty secure and I like that I could fix it pretty easily if needed. Given it's an 06 model I've made it this long....

The joys of boat ownership....

Prob a tight pair of pants...

IT was in MA prob a bit far for you.

nice. thanks for sharing as I sit in 5" of the white stuff and freezing temps.

If plastic, I had good experience with JBWeld for plastic. I feathered it in a crack or hole and sanded. I painted with a sealer and then color matched paint for a headliner crack. Came out pretty nice.

In my experience many 2 strokes can be rough at low idle. A good fuel cleaner as well as adjusting idle goes a long way.

No prob. Ask for Lee, she'll take care of you.

Last year was I did all the interior cushion covers and curtains. This year nothing! My wallet is liking it.

You can easily add one to the boat and it was an option when new. They drill the hull and install a tunnel for the thruster. I'd say you are looking at $12-15K.

Most early boats had the railing that was in pieces and was held together at the intersections points with female adapters and set screws. I prefer it because replacements can be done easily, low piece part cost and low shipment cost due to knock down design. The one piece ones sure look...

Can't use starboard or any plastic board, it needs to be structural to hold the weight. I'd use 3/4" plywood, router everything and support on the backside with wood support strips (glued and screwed). The big thing will be weight and storage when not desired.