Search results

I did this job on my rig a few years back, same as yours it was rotted almost all the way across and between 1-3" up. I used 3/4" marine ply and covered both sides with laminate like from the factory. On the off chance that I'll have the boat long enough for it to happen again I sealed all...

You might want to reach out to Marine Glass Specialties. I redid the windows on my 96 GS and they had a lot of the rubber seal and trim needed.

I noticed more bilge water than usual when using the livewell on my GS, when sloshing around it would go up the sides and spill over the unsealed lip into the hull. A little patience and a lot of caulk took care of it for me

Simrad has a solid AP system. The compass can be finicky if you don't choose a proper mounting location though.

I have a 96 GS with a similar set-up, but I think our tops are a bit different. I installed the unit last season but didn't like the angle of the dome without a wedge. I used the 4° with aft leaning pedestal on a hinged mount with the light bar. I spliced in connectors to unplug the radar and...

Removing 4 of the square gauges and replacing with the 6YC freed up enough space on the gauge panel to fit a 9" simrad on mine, works great

PM sent

How bout now? Sorry fellas

Manual has corner of cover torn off, no other damage to pages, a little dirty in the water pump section:D $35 shipped Con. US Spreader lights work perfectly, $35 shipped Con US Fuel level sender from aft tank of Gulfstream, replaced during a temporary loss of reason, works...

I have 3 of the Lumitec Andros lights for courtesy lighting but in red. 2 replaced the old style incandescent for the step leading to the walk-around, and I added 1 at the step up to the helm not installed in this pic.

I had great results with cerium oxide on a wool buffer pad, but my windshield was off the boat.

On my '96 it was a cream laminate like you would find on a counter top

Yes they used to offer a bundle with GO9 & 4G radar. It depends on which model GO you have now. It needs to have a yellow 5-pin connector on the back for input. FYI Navico produces Simrad, Lowrance, and B&G products and for the most part they can all network with each other in comparable model...

So my son is currently living in the Seattle area. I'm thinking about visiting and taking him on a charter. Since Utube loves to keep you seeing ads I've watched a bunch of suggested fishing vids, some Puget Sound and some Vancouver Island, one that piqued my interest was jigging for squid to...

I recently rebuilt my original Ongaro mini twin. There was a mud dauber nest on one side, I don't think I could've packed much more crap in there if I tried. The other side had some miscellaneous stuff as well. As Skunk mentioned, the electrical contacts are an area of concern. They are like an...

Here's the ones from Boat Outfitters.

Sold to Fish-On

Msg sent

Used, works perfect. Purchased from a user here that carried them, very little actual use. Light scratches on the dome cover visible in middle pic as a shadow. $30 shipped U.S.