Search results

We just wrapped up our first season with our 2016 Grady White 306 Canyon and wanted to share some impressions. Operating out of Buzzards Bay, Massachusetts—an area well known for its rough afternoon seas driven by southwest winds—we logged roughly 2,500 miles. Our trips included offshore...

I’m looking to add one or two rod holders in the bow area on my canyon 306. Primary use is to hold spinning rod as we move around the tuna grounds. I do not plan to fight fish from this rod holder. Thoughts on placement and degree? I plan to buy from Gemlux. Thanks in advance!

Hi, I'm a new owner of a 2016 GW Canyon 306 and having issues with port battery. When boat is not used for a week or two the port battery is drained (not able to start engine). Battery charges right backup when using boat. I replaced battery thinking i had bad battery but same issue. Looking...

I’m looking to replace the aft bilge pump and float on a 306 canyon. What’s the best way at it? Access plate in engine well is small and hard to access due to engines. Plus I’d need a lot longer arms. Can I get at the bilge pump via lifting floor panel? Maybe I need to cut in a larger...

New owner of a 2016 306 canyon. The boat will be on a mooring this summer (previously rack stored) and curious if I need to add anti fouling paint to the engine skegs. Boat has twin Yamaha 300s. Forgot to check this out before hauling in the fall. Thank you.

Hi, I recently purchased a 2016 306 canyon and I’m curious how well the fish boxes hold ice. Im New England based and my fishing trips are 12+ hours. I’m hoping to use the stern box and maybe one of the boxes in the bow. Are they well insulated? Or should I add insulation to my spring...

I purchased a 2016 Canyon 306 this past fall and noticed there is a huge space under the deck in the bow that is accessible via the factory installed 6" round deck plate. This is the compartment where a bow thruster would be installed (mine does not have bow thruster). Curious if others have...