Search results

Pro Mariner would be my recommendation

"i guess the closed transom are much better? Like on the 228 are 232" YES And, what's better than that is: (1) No wood in the transom (newer boats), and (2) No balsa coring anywhere (gunnels, decks and hard tops). All older Gradys suffer from these two issues. I would say 100% of all older...

I would remove the one on the opposite side, take it in to your local glass shop and have them make you a new one. It's not hard at all. Drilling the holes can be tricky but they know how to do it. You can dry fit the opposite side glass to the one that broke to ensure an exact match and fit.

It's a 25 year old boat... I would want to see what's under that plastic corner piece. Easy to remove the screws, pry it out without breaking it and inspect the top and corner seam. Then - if okay (or not), re-install and seal with 3M 4200 fast cure. In addition, I would have someone do a...

Excellent! Now all we need are what A, B, C, D, etc. mean. Was there a legend with this chart? The letter E appears to be the beam. Thank you for posting this!

Both of these 30 footers are excellent boats. Ten years ago, I did a 2X upgrade from a 265 to a 330 with zero regrets. For me, I personally LOVE the center helm. If that's you then you might consider the 330 as it will be the one time upgrade for your growing family. I know it's more money...

On the subject of filtration, three years (and 500 hours) ago, I converted from 10 micron to 2 micron Racors. My VST's are squeaky clean (twin F300's) and may never need to be cleaned out.

You can do a hammer tap test . I bet it will have that dull sound which = bad news. Looks like a classic leak from that through hull.

Mine haven't budged in over ten years but I don't store heavy (expensive) rods/reels. I'd say mine are medium weight - including 4 electric reel set-ups. I installed the Taco Rod holders with good quality SS screws which go into the plywood backing there nice and snug. One nice thing is the...

I put a 4D sized AGM in that generator space for added 12V battery capacity (now my Bank Two). My Bank One are the 4 Group 27's installed in the normal location (port stern area). In place of the need for AC 120V power, I use a Jackery 1000 version 2 to keep my Pro-Mariner Battery charger...

You're going to love it. I have heard nothing but great reviews on the Next Gen. Nice installation as well. Good luck and run the heck out of it. It will last longer...

Remove the Center pop-out inspection port right in front of your outboards way back in the splashwell. There are 5 of them. Remove the Center one. You'll see the pump way down there. It helps if your arms are 5 feet long,..

Your gauges are 23 years old. One option is to remove both gauges, swap them and see if the bad one works. If so, you don't have a wiring or signal issue but a gauge issue.

Looking at the photo of the 340 helm area - oh brother... Don't even think about fishing on that thing. Ugh.

Transom cap still the same. <<<< OMG Really? I'm shocked with this. Do you think they are still making transoms as before? Have they not learned from all the cases of wet and rotted transoms? I find this very hard to believe...

I think about 30 seconds - but they are a very important 30 seconds. When I changed thermostats, I took the old one and placed it in a coffee cup of boiling water in my kitchen sink. Then I slowly added cold water to the cup. The thermostat closed up in about 30 seconds as I recall. You can...

The center helm is what made the Express boats "different". I personally love it. Losing the center helm makes their boats like all the others. Oh well. To each their own...

Yes. 4,400 hours from 2006 F250's over 16 years. I fish commercially and put alot of hours on my Yamahas. I think, the more you use them, the longer they will last.

Dennis is right. If you have 3 engines, I bet they are big. And bigger engines require FULL water pressure. I do my F300's one at a time (5-10 minutes). I'm also a believer that doing the flush when the engine is HOT makes a difference. Accordingly, I'll leave an engine running while the...

Both choices have their pros and cons. And if you choose one, you will learn to like it very much. We've owned our 2006 330 for 15 years and love it immensely. I have a friend who has a Marlin and when I stand on it and check it out, it seems "small" compared to the bad ass 330. I guess you...