Search results

Got all 4 batteries out. They are just turning 3 and all 4 were start batteries no deep cycle. Got 4 dekas coming in agm. Got the original charger out it still worked bu was only a 2 bank charger. I don’t know what it really mattered all the batteries were pretty much wired together any way . I...

Love the keys

Well this is the project I really didn’t want to do at this time. Mercury manual says AGM batteries. I was gonna just put 2 in and isolate the 2 banks but the wiring was horrible and all 4 batteries were group 24 start batteries. So I ripped em out and ordered 4 deka group 27’s. I’m gonna go...

Couple of pics for now

Mine are fly by wire so no shift and throttle cables to deal with

There is tension adjustment on the shift lever. Google whatever shifter you have for instructions.

Seriously shark tank. I saw it on born again boating on YouTube . I have no plans of marketing anything. I just thought I would share a project .

Has anyone done this ? I figured while I’m at it might as well move the flusher from the motor to the boat to make it easier to flush. I added a 3/8 brass barb to extend the hose. Bought 3/8 reinforced hose ran it thru the rigging tubes and over to the battery side. There’s a place under the lid...

Best access to the wiring under the helm is remove the surround around the electronics box .

Very small flat blade screwdriver. Pry the caps off carefully.

I’m not trying to beat you up just saying heat is your friend when dealing with plastic. I have heated the end of a screw driver to cut through plastic to remove it if I have to . I think on the starboard side I removed both and replaced the outside fitting first. The inside one is going to be...

I used a heat gun to get the barbs out. They are plastic heat them up and shove a flat blade screwdriver in there and pry them out. A very little heat applied to the hose and shove it in the fitting after the fitting is in place. Make sure your clamps are slid on the hose and in the correct...

I just replaced them in my 330. Th marine I got original replacements

That white motor is looking good

Picture doesn’t do it justice. It’s just sitting up there. Looks really good . Will get better picks when I get it installed.

Survey the hull check for delamination around the rear vents on outside of hull. The 330 is a great boat. I’m on my second. I think 08 is when they changed the floor design in the cockpit. That’s the year I really wanted but found my 03 for a really good price. New power and new electronics won...

I had an 86 24’ offshore it had a single 200 Merc when I bought it . I switched it to a pair of 150 mercs. That was the best repower decision ever. Totally different boat with twins. I fished that boat for 13 years. It was a great boat

Here’s the finished product with blue backlighting. It’s finished being shipped out in the morning.

Busy day got all the steering reinstalled on the motors even the tie bar fit perfectly.

got them hung today now to start rigging