Search results

Man I owned a auto paint and body shop for 38 years. It’s hard for me to pay someone to do that but I just don’t have the shoulders for the buffer anymore. It is amazing what sanding and buffing will do to a GW. The key is sealing it up with wax once your through. The gel coat is porous and...

Nope crawled down in the bilge and got to it. I’m not a fan of cutting holes if I don’t have to. rather than fight to get the old floor drains out I just snapped them off . I used a heat gun to warm up the pieces and the broke fitting came right out . I installed the new floor drains I had...

Yes because my dealer changed the date numerous times. Glad I’m not a Yamaha dealer. The Mercury 300’s were quoted same money as Yamaha. Problem is the 5 grand in rigging and props I have to buy. Already spent a couple of grand updating all my Yamaha rigging. Oh well it’s only money. Hopefully I...

December

Yeah stupid me sold my old 225’s and let the Yamaha dealer drag me out for 6 months then send my brother over who is there tech to tell me I’m out of luck. I understand supply issues but damn they had my 42 grand for 6 months and can’t even pick up the phone and call me !!! Rant over

Well I’m giving up on the wait for my 300 yamaha’s. I’m seriously considering the new 300 Mercury V-8. Anybody repower there express with these motors ? Interested in the results. Thanks for any input.

I just did mine. I replaced with the exact same ones that were in it. Not a bad job on the 33. I did it on my marlin way more difficult.

No inverter on my 330

I have a 330 and we will use the boat to cruise and overnight a lot. Definitely need a generator. My current generator on the boat I just bought is a Kohler 5E gas it has 6. Hours on it. My plan was to pull it and put a diesel in it but it’s in such good shape and I have dumped a ton of money...

I used the exact same ones that were in it. They should outlast me . The hoses and clamps were fine . My boat has a gas generator so didn’t have to deal with that. Port side I took the battery switch compartment loose and was able to move it out if the way enough to get to the fittings. One...

Raybo marine on the hull truth. I think I paid about 130. For 4 of them

On my old 02 marlin there were screws down low you accessed through drains they put in the material to let moisture out. After removing the screws they just lifted off. Hope this helps .

Got 3 of these from west marine. Blue/white. They were like 150. Each check out the stainless scuppers .

I just replaced all 4 floor drains in my 330. Not to bad just have to crawl down in the bilge to do it. No holes needed.

I pulled the rear vents off mine. It was raw coring no sealer. I put 3 coats of resin let it dry then 5200 and reinstalled the vents.

Ours will be port where boat is slipped

I don’t know boat outfitters wanted 525 to make mine. I wound up doing it myself and it looks pretty good. I sanded and polished the edges .

I bought the switch covers and weather proof caps from them and did everything myself.

Finally got my switch panel done

Here’s what I did on mine. Got a flat screen tv and moved it to the front wall of head. Got a fusion head unit with dvd for the tv. I ran nmea cable up to the backbone so I can control it from the garmins. I ran all new speaker wire and RGB for the speakers. Also ran av to the flat screen for...