Search results

Your feelings are semi incorrect, previous owner did neglect however I had vessel surveyed and mechanically surveyed by yam tech prior to delivery, appreciate the input. Port prop hub spun starboard good to go

Put engines in gear starboard rocks back n forth approx 1", port spins free. THATS HOW TO CHECK. Remove port prop and perform exact as aforementioned process. Port shaft responds same as Starboard, Rick's back n forth approx 1"....spun hub it is....

Engines surveyed with decent compression, decarbonize by yamaha tech, compression went up good numbers....so, went out full fuel, water 2 persons. Boat was bow up, wouldn't plane. Upon return recalibrate trim tabs. Tech finished new charts, AIS, etc...sea trial to calibrate auto pilot and the...

UPDATE: got it out! 3 allen head bolts hold the cover (removal not required), 4 larger allen hold the motor unit. Found shear pin intact. Went to remove lower prop assy. and found the 2 screws (red in illustration) backed out but buried in bottom paint virtually invisible. Lesson learned, now I...

Thank You, the pdf's I've seen do not have the gen2 illustration as this, however number 36 "the pin" isn't on this one either nor are there instructions guiding how where....I've been a technical writer for the aircraft industry years back; always fool proofed detailed instructions as there is...

Kevininhb@yahoo.com Thank You so much....pulling my hair out here...

Well, I'm totally confused...my Lewmar part number 591838 12v 3kw can't be found anywhere..I find 24v 4kw looks same which is completely different than any I see or any manual. Yes I've removed all bolts, 4 smaller Allen's between 4 larger allens??? All holding the same lower housing....I...

Very different units sir. Thank You for trying

Pics for reference

2017 330 bow thruster shear pin replacement 185TT Boats out of water, bottom attachments (Allen bolts) removed but unit will not separate completely. Any ideas???

2017 330 bow thruster shear pin replacement 185TT Boats out of water, bottom attachments (Allen bolts) removed but unit will not separate completely. Any ideas???

Not the answer I was looking for, already own a shureshade....looking for a resolution to voltage drop etc

How do I resolve the issue described? Is there another path of least resistence?

There's a set on ebay

Found it. Where is everybody lately...Zero replys??????.

Where is the fuse for the shurshade? I've found a fuse block under the Garmins enclosure but....I'm only getting 1.2v in the shureshade black box, 12.6 everywhere else???? It's racked hard, I've actually began disassembling. Called ShureShade they linked me to you tube videos to no avail for...

Thank You for the advice. I found a good adapter at Minnies in NewportBeach. They've many Marinco for great prices. 30 amp at slip is OK, I don't require a/c. Tender batts is most important. Thanks again.....

'17 GW Express 330 twin yam 350 Isotherm 49 on deck the rails are fused together rusty. Isotherm dr65 in cabin rusty but possibly still usable with thorough cleaning. Any info how to disassemble drawer/ glass and rail slides. Can I get replacement slides? How about new fridges? I need at least...

I'm sorry meant to convey 30 to 50 at the marina as well seeking advice to tender batterys in the yard