Search results

Yes. A few years ago, I put my prescription sunglasses on (need them for close up and small lettering due to getting older/old) to configure a few things on my MFD. I spent about 20 minutes adding some waypoints, renaming some others, etc., etc. Then, I wanted to get something out of my truck...

Congrats! I have the 306. The 271 is basically the same, just a bit smaller. You are going to love it. When you get it, try to see if five gallon barrels fit in the transom fish box. They fit on my boat. I out two in. One for stuff and one for trash (has a hole cut in the lid).

As I see it, ypou options are: Option 1: Sell them as-is and disclose the rot issue. Option 2: Repair and sell them with the "hope' of recouping as much $$ as possible. Option 3: Part them out. Assign a net dollar value to each option and go from there. I would go with Option 1, because I...

Fill tank, add one cup of bleach; let sit for an hour and then pump it out (be sure to pump it through every line in the boat). Fill again and pump out through every line in the boat. Repeat this again. Fill tank, add one gallon of white vinegar. let sit all day or overnight. Repeat pump out...

Hi, Before making any final modifations, I would suggest experimenting with it using 2x4s. If you like it, I would suggest having well made brackets fabricated. I'd even add storage drawers under the seats at that point.

actual (not average) 2-3s should be managable, but the issue is that the waves won't be limited to 2-3s. You have to plan for building seas, etc.

"two to three feet and occasional 4 according to the weather service."..........I believe those are average wave heights. A typical kitchen counter is about 36" off the floor. add another foot in it's pretty damn tall...plus you have the wave period, direction, shape... This past Saturday, our...

Add a camera to you boat

The solution is for the marina to move him to an outside slip withoiut a neighbor.

Universal Colors / 49609 / IVORY CA209CROSSFIR4.0 g CF122STRONG W61.7 g CF128FERRITE1.3 g CF100STRONG B0.1 g CF132MAGENTA0.1 g CF214CROSSFIR35.2 g CF224CROSSFIR18.6 g It's not perfect, but very close.

that's terrible hang in there and be well

"I talked to a rep at a fishing seminar they said tackle direct can’t get any supplies do to not paying there suppliers." Death Knell

The "bad" AGMs should be replaced with new AGMs. If the new AGMs fail, then there is an issue that MUST be resolved.

How about having one made from shade cloth and bug screen? How does it attach? I could likely make it for you for materials cost and shipping (of course, I would need a template).

x2 on Sailrite Do you have a heavy duty sewing machine?

Try three or four bars of engine trim along with four or five bars of trim tab trim.

The windshield is ACRYLIC. According the the manufacturer, no special cleaning is needed (BUT no ammonia based products). I use just regular boat soap.

You may want to try reaching out to RAYBO on THT. I believe he is a 'glass guy on LI.

ok... if it was local to me, I would have offered to put a first of eyes on it for you.

IMO: nothing can be determined from those two photos Where is the boat located?