Search results

That looks good now you don’t have to worry about it anymore.

I had the samething coming out of my gunnel. I was thinking water was getting in from someplace also. I left it open when it was shrink-wrap until it stopped over the winter then resealed my fuel tank fill cap and two rod holders and haven’t had it since. Make sure you leave an area where the...

Congrats beautiful boat.

This is a picture of my 98 268 islander while doing the transom. You can see the aluminum bracket.

fishing the outer banks and got this 102 inch and 550 pounds.

Martek marine electronics in Avalon. They are doing some updates and new unit on my boat now.

I also put Garmin in my 268 and love it. Electronics are expensive regardless what brand you use. My boat is in Somers Point And I used Martek in Avalon. He is pretty good. I flush mounted the two GPS‘s and had Martek do the radar and all wire everything so the two units would talk to each other.

Let me know if you need anything while replacing the transom. I did the one on my 268 two years ago.

GW performance welding in Northfield NJ made a set for my Islander.

Fishtails this was my transom when the outer skin was removed. It was wet no rot because of the green board but delaminated. Grady recommended using the same material when replacing it so it didn’t change anything with the balance of the boat. You also have to cut holes in the decking to remove...

Yes I am my boat is in Somers Point. Great bunch of people

I would be interested also. I’m in Somers Point. Also have a friend in OC with a 33 express and another in Somers point with an overnighted

I have a 1998 Islander I can try to answer any questions you may have

I think because it’s easier and quicker and I’m sure more inexpensive. Once it wet it is a very costly repair.

I glassed the holes then put the brass fitting in so if water does get in the green board will not get wet.

I went through it two years ago. I ended up redoing the entire transom and glassing it completely closed. Make sure you address the brass through hulls in the motor well. I had water entering there also because one of the brass fitting had cracked. Youngs Fiberglass did my boat and I am...

Can you see it in this picture? If not I am picking my boat up this week I can send you a better picture.

My 1998 268 was ordered with just the main tank 134 gallon tank. The tank is also located in the forward compartment. When I pulled my hatch up the fill hose and vent hose are already run and capped off and the wires for the fuel gauge are also there. I also want to add the Aux tank for the...

They are reversed on the Grady white site for my 1998 Islander.