Search results

Still $37 a foot where I am in the yacht club. Safe Harbors got bought out so you know the marinas are going up up up. For me the yacht club was the ticket.

It's a custom GW part. Likely not going to get it unless you find a scap boat. I'd go the starboard route and have a cabinet guy make one up.

These guys did mine. They did an excellent job but they are expensive.

1,) Chair. Check out the Llebroc line of chairs for the helm chair. They build them for GW. Won't sell you the exact chair, but they sell the same model without the GW do-dads. Taller, seat folds as a bolster, high back and excellent arms. The GW chairs prior to the new ones by Pompanette...

First thing I'd do it hit them with WD40. When mine sticks or is intermittent I do this and they pop back to life. Happens about every other year. Now as part of my pre-storage items I hit the one on the binnacle and the two individual ones.

It's 10lbs in a 5lb bag, I'd look elsewhere unless you keep the boat. Otherwise you'll give $ up on the resale.

Glass is flat hardware is Taylor Made. I;ve been looking for replacements without luck.

X2 on the screw ins. When replacing I'd always use them.

If the motors are pre 3006, the coating Yamaha used back then is suspect. Once you see aluminum, it will wear. You likely get 5 or more years but eventually, if the top is breached the motor is toast.

This. The strap will cost 10X from GW.

It's a common problem. The meter is bad. You can't get the exact meter anymore. You have to order a kit. You'd have to cut the panel to make it fit. I chose to live with it. It says 120VAC maybe put a sticker one it if It bugs you.

Small screws near the weep holes and then push up. You'll see how easy they are to recover when you get em off. Monel staples, fabric and foam. Can get the fabric, foam and other stuff online.

I carry both. If I had to pick one it would be an epirb.

A pic may help.

Make sure you vet posters that are new or have few posts. Scammers exist everywhere.

Ask for pics and do your dilligence with short time members or few posts. There have been scammers here before... I'd def contact A&J. They do them for GW and will know the boat.

Dennis is spot on.

nice job on those decks

If it doesn't work, it's either a voltage issue (switch, fuse or connection) but I find it is usually the pump.

My experience with the website is in the middle of the two above. A tad slow and expensive. I did a custom logo with a local shop and had my own sweatshirts done.