Search results

I’m using the factory installed flush port just inside transom door. Very easy access. Works well. Just need new o-ring for attachment.

Hi, my o- rings on quick connect gave way. Anyone know the size? Hoping McMaster Carr has replacement. Thank you.

Thanks for the ideas. Port battery is brand new (weeks old).

Thanks for quick thoughts. I think I’ll unhook the yellow wire for stereo memory and see if the does trick. Pretty confident my floats / bilge pumps working as desired. I’ve spent considerable amount of time on boat with batteries off and never hear bilge pumps. Trying to trace yellow wire...

Hi, I'm a new owner of a 2016 GW Canyon 306 and having issues with port battery. When boat is not used for a week or two the port battery is drained (not able to start engine). Battery charges right backup when using boat. I replaced battery thinking i had bad battery but same issue. Looking...

$4.10 Mattapoisett.

Update - job done! Boat was on the hard. I removed the control arm connecting the engines and this allowed my to get one arm all the way down into bilge. Space between engines (300hp) very tight. Luckily all connected with Deustch connectors. I wish Grady had run cables to an easy to access...

Check bilge pumps are working. Put plug in boat and fill up bilge with water until pump comes on. If you have more than one bilge pump pull fuse on lower pump to work second pump.

Nice! I’ll have to check my local HD. Thx for sharing.

I’m looking to replace the aft bilge pump and float on a 306 canyon. What’s the best way at it? Access plate in engine well is small and hard to access due to engines. Plus I’d need a lot longer arms. Can I get at the bilge pump via lifting floor panel? Maybe I need to cut in a larger...

I like presta products for compounding and polishing. My go to for wax is Collinite. Level of oxidation determines starting point. My current boat is dark grey and medium oxidation. I’ll be compounding, then polish and finally waxing. Compounding and polishing done with variable speed makita...

Many thanks. Exactly the information I was looking for. Cheers.

New owner of a 2016 306 canyon. The boat will be on a mooring this summer (previously rack stored) and curious if I need to add anti fouling paint to the engine skegs. Boat has twin Yamaha 300s. Forgot to check this out before hauling in the fall. Thank you.

Hi @Seafarer228G - I just made my donation - please dial back ads. Thank you!

Solas is one of the boat manufacturers who uses magnets to keep cushions in place. Really great idea. They also put magnets embedded in the gunnels that are paired with drink holders. I’d love to learn how to retrofit this into my 2016 Grady.

Thank you for sharing all the first hand experiences with Grady's ability to hold ice, and for all the suggestions how to improve the insulation. I think I will tray my luck using fish boxes as-is with mix of block and cubed ice. Now i just need to find / catch fish to dirty up the ice. Cheers!

Hi, I recently purchased a 2016 306 canyon and I’m curious how well the fish boxes hold ice. Im New England based and my fishing trips are 12+ hours. I’m hoping to use the stern box and maybe one of the boxes in the bow. Are they well insulated? Or should I add insulation to my spring...

Thanks for all the ideas, etc. Here's a picture of the panel in question. Cavernous space underneath (unless you have bow thruster). looks like four screws holding it in place.

Great idea. It would put my glass skills to the test! I’ll need to think through it.

Exactly, looking to see if anyone has swapped out the 6" round access plate for something like 10" x 15" deck hatch. It would make for good fender storage (compartment is not finished).