Search results

I have been ad free for years with donations - recently I have been getting ads & don’t know how to get rid of them JIP40 jip1940@yahoo.com

They have a forklift that can handle my boat - this facility did my repower 3 years ago & last summer had it there for 3 months

I will be on a single ground level service type rack nobody above me

X 2

Thanks I’ll check into it

When I’m in the slip I have shore power & keep the A/C set at 76 when I’m not there - keeps the cabin great

I have a counter top dehumidifier that has the discharge water draining into the sink & then overboard - but when I used to use it I kept my cabin door closed, thought it would give better protection to the cabin. I will give it a try leaving the door open & add a fan for air movement - thanks...

Unfortunately no cover - open to all wind and rain on FL panhandle. It is protected by some multilevel racks and some 1 & 2 story buildings. Any type of a ventilation device you can think of, I believe I will have access to 30 amp power

Moving 330 from in water slip to dry rack storage outdoors - do you enclose the helm area completely or leave a couple of flaps open for ventilation

Thanks for the advice I’ll get some help checking the wiring

Thanks really appreciate the help

From the photo it appears that the transducer covers the bilge drain which I can’t do as I plan to move from a wet slip to dry storage in the spring

Chris, is it possible or even feasible to mount that transducer flush on the bottom of the boat instead of on the transom

Thanks, where do you have the transducer mounted & do you notice any prop wash interference

Thanks for your response. Where do you have the GT56 positioned relative to the engines & do you get any prop wash interference?

I have a 2002 330 express with an Airmar B164 thruhull transducer, tied into a network with a 5212 and a 5012. I just purchased dual 1243XSV displays to replace the 5212/5012 units. The package I purchased comes with a GT56 UHD transom mount transducer. I have no experience with a transom...

I have been getting my stoppers at Ace hardware. They are in the section with the small drawers with the specialty hardware.

I did the same thing on my 2002 330 about 5 years ago & they still look practically new - use Imar cleaner & polish products

Even if I keep the pop out plates, the suggestion to secure the plates with the 100 lb mono is an excellent suggestion - thanks

Chris thanks and I also plan on having a spare pump with alligator clips by the time my repairs are done