Search results

Star Board

Last Chance I Googled and got (250) 616-7130 If this is correct, do you have a contact name? Ty JT

Thanks to all of you, nice to see other ideas ! Some guys are very clever and want to take the time to get it right ! Any more, keep them coming ! :wow JT

Jim T Have you shared the "Thruster Hole" picture with Grady? If so what did they think about the "meat" left on the bottom of the hole? Maybe you inspected and thought it was OK ? I'm thinking log? As far as opinions of others, thank you but RTFQ. TY for the pictures, very helpful. Jim

Do you have pictures of canvas upgrades you've done to your Grady? Post them here. Thanks

I would like to see pictures of Grady White's cut open when you or someone has installed a Bow Thruster. I have a 2004 232 and wonder what I will find when I cut into the front V-berth and look down? Foam, open ???? I know about Florida Thruster's, would like some owner info. Thank you in advance.

This was an "interesting read" ! Thank you , but :sorry I will not go out and fish with you in the "straits".

And to answer the original question after many hi-jacks, he is a member ! :goodjob :goodjob

I have towed many Grady's up and down the inside/outside passage. First order a FLOATING TOW LINE from http://www.mooringlines.com/tow_lines.htm TOP KNOT ! This will save you thousands ! You will have a situation where you forget the tow and run over the tow line (this will prevent this). You...

I understand "it's hard to understand" ! Not to beat a dead horse, have you contacted the manufacture "read engineer" of the swivel to get his/her ideas ? So, my last post. Have fun and stay safe ! JT

This was suppose to be first, then pictures ! Physics ! When you add the shackle you are telling the "designed swivel" the anchor is backwards or 90 degrees. Also, the way you put your line and/or rode into the locker has an effect on how much twist you have. The way you pull up your anchor...

Another stern tie. JT

The swivel is not designed to be used as shown, it should be attached directly to the anchor. If it does not fit around the anchor, get a bigger one. Mine is over-sized and I put washers in between to keep the slop out. Mine also hangs up on the out play, after releasing the safety chain, I...

Just unscrewed my Drive plug to check for water (every year, as I did have water once), the backing nut on the inside of the tank is now loose ! I needed that ! I called factory and they said "never heard of anyone recovering nut, you will have to tap and die it." The tank is aluminum, made...

Lets us know if you find one.

The valve you found under the step is the thru-hull for the toilet macerator/out. I have wanted to replace the cheap porta-potty with a flush toilet, but can't find one that is low enough to fit in the "box". All of them would stick up, and not allow the toilet hatch to lay down, allowing the...

bfrank, Use some auto rubber cleaner/sealer on your rub rail. Something like "Mothers Back to Black", you'll be amazed at the results. Jim

I have the original Grady deck lights and LED deck lights. When I'm running, Halogen. When at anchor, LED to save my batteries.

Why would you replace your running lights with expensive LED ? Your motor is running, you do not need to conserve amps ! Anchor lights, the LED is brighter and uses less amps. DUH, change it for all the reasons.