Search results

  1. B

    Water in the cavity of the swim platform on a 228?

    That's the bracket. It has a drain on the bottom.
  2. B

    Rhodan on a 226 Seafarer

    While my trolling motor is no with spotlock it definitely was mounted in the most superior fashion I have seen, in my opinion. I will be order a new version with spot lock soon. Not sure of which manufacturer to go with. Leaning towards Minn Kota for the lower cost replacement parts per the...
  3. B

    Another post on props 228 Seafarer F225

    Huntington Beach, CA
  4. B

    Another post on props 228 Seafarer F225

    I'd love to make a drastic jump to the OFS4 in 17P to see how it runs but throwing props at it at $600 a pop will get old.
  5. B

    Another post on props 228 Seafarer F225

    Went for a quick run with the kids yesterday. I was able to trim the crap out of it and get it to 6100 bit never gained any speed. Actually lost speed. 4100 rpm made 20.5 kts and 5500rpm made 32.5 kts. Two kids (90 lbs total), both fuel tanks full, 50 gallon bait tank full, some gear and light...
  6. B

    Another post on props 228 Seafarer F225

    Mid 5k rpm and mid 30's mph I mentioned it in my post but bolt is in top hole of bracket and second from top on engine.
  7. B

    Another post on props 228 Seafarer F225

    I wonder what that 0.25 difference in gear ratio translates to in how much or less prop it can swing?
  8. B

    Another post on props 228 Seafarer F225

    Never heard of anyone running a 17" on these F225 or F250's. You mean 17P?
  9. B

    Another post on props 228 Seafarer F225

    Trolling batteries are in the berth wear the portable toilet goes. I don't use the transom lice well, I have a 50 gallon bait tank in the middle of the cockpit. No one in the transom ever. I never go WOT. I think a couple times mid 5k rpm was WOT at about 35mph. I get a few mph when I have...
  10. B

    Another post on props 228 Seafarer F225

    Looking to see what props you guys are running on 228 Seafarer with either F225 or F250 in the 3.3L. Please please can you post replies if you actually have this boat and engine. People on social media are clowns and I only want data and experience from people with this boat. I am currently...
  11. B

    More prop talk Seafarer 228

    I don't think your comment was harsh. I am taking all with a grain of salt but those with the same same or at least same with F250. I do appreciate the replies from all though. What 3 blade 17P are you running? What is the lowest RPM you can plane? Do you happen to know your 3500, rpm, 3800rom...
  12. B

    More prop talk Seafarer 228

    4k gets me to plane and yes falls off below 3700. GPS speed which may he's gauge. Unknown of the 17 was worked or not and have had the boat since March.
  13. B

    More prop talk Seafarer 228

    Engine is good. No faults, good compression and runs great. Hull isn't smooth as silk but cleaner than bottom paint.
  14. B

    More prop talk Seafarer 228

    I am suppose to get 6k rpm and I did with the 17m, but I couldn't plane until almost 5k. Now I plane at 38-39. The performance data for my year was saying 28mph at 3800rpm, not achievable at my load., but I should be doing 28mph at my rpm I would think. I would be happy with my speed if I could...
  15. B

    More prop talk Seafarer 228

    I max RPM in the low 5k's at low 30kts
  16. B

    Finished!

    Is that a complete new glass or did they just stitch in new glass?
  17. B

    More prop talk Seafarer 228

    Seafarer 228 owners. What props are you guys running on the mid-2000's vintage? Looking to hear some numbers. I'm running a 2005 Seafarer with same year F225. I have a Power Tech OFS4 15.25 x 15 (per prop gods). My cruise is 4000rpm @ 20 kts with full load being 145 gallons fuel, 45 gallons bait...
  18. B

    Questions about buying a 228 Seafarer...

    Go fly out and look at it. I made a deposit and flew out with no inspection purchasing my current boat. If you get in it and looks in the bilge, it will be obvious if there has been water in there. Mine was clean and bright as a light. No water standing inside and places that would be prone to...
  19. B

    Seafarer 228 4 blade vs 3 blade

    Found the recommended prop used from a guy nearby. Prop is basically new. Paid $200!!!! Adhesive from stickers still on it and almost no exhaust in the prop. I'll report my stats in a different thread later. Might test tomorrow. Seller reported there being way less than 100 hours on it.
  20. B

    Seafarer 228 4 blade vs 3 blade

    Do you run heavy? Full tank with auxiliary, lots of gear etc? What are your minimum planning RPM's and speed. Thanks