Search results

See link below. One more thing you can try is to enter the program mode and change to "cool only" (#1 option in P1 parameter). See page 12 on the PDF. You are most likely in auto mode meaning the system will go into heat/cool mode depending on the temperature you have set without having the...

Does the thermostat show that it is in cooling mode and not cold or its doesn't get to cooling mode? I would recommend the following test mode per the thermostat manual. If it blows cold during this test it is a bad temperature sensor. To activate the self-test program, disconnect the AC...

My local GW dealer had them in stock. $440 for the set. He said there were two different sizes. I went with the larger. Ignore the filthy hull.

Do you happen to know your trim assist RPM settings for the Marlin?

Same, my 225 port engine would stall/alarm when switching in and out of gear quickly at the dock but would always start right back up. Never could replicate in open water.

Picture of repower. Probably a dumb decision putting this much money into a 20 year old boat.... they are fun.

Yea its the same. Always confused why they would make the primary tank pointing right or pointing aft when the primary tank is forward. Thanks!

Every year I second guess myself on this tank selector switch (don't have a label above the valves). Primary tank is pointing the valve aft and the pointer is opposite of the handle, correct?

In the water for two weeks and hauled out for a repower (don't trust winter storage marina).

ASI actually did provide a price for just the layout, without install and had a template on file (maybe yours). Marine Mat is significantly cheaper, assuming because they are direct and not a distributor/installer.

Would it be safe to assume the layout dimensions on a Marlin hasn't changed in 20+ years? Marine Mat has a Marlin in their files (but not listed on the website) but they don't list a year. ASI Decal would be my local Seadek distributor. Wondering if they would sell w/o taking dimensions since...

It's tucked away on the opposite wall of the battery compartment in the hatch below the rear bench seat. Replaced mine last year.

Yea, I was looking at that picture and thought the hull was way too rounded.

Wondering if anyone heard more on the sinking in Ambrose channel over the weekend? Report as a ''30 foot GW speed boat''??

Here is a single 8616xsv on a Marlin. Don't think there is any chance. There is a video on YT "Dan Londero's Sweet Grady White Marlin 300" where he mentions he had the dash custom done to fit twin 15".

I added a second VHF with AIS late last year which I connected the antenna previously used on the old VHF. Didn't get around to seeing where second antenna was wired to connect to the old VHF.

Dumb question but without being able to trace out I know someone will know the answer to this. On a factory 2005 Marlin, what is the second antenna originally intended for? Is it just VHF redundancy or is it something with XM?

Which model are you buying and which Marina? I'm in Belmar just across from Shark River Island.

Springfield 46 flip up. Around $500 on West Marine.

Springfield helm chair in the off white matches pretty well to the Grady cream. Btw, is the "what did you do to your Grady today" thread gone or buried?