Search results

There was no groove or o ring, I will be applying sealant once everything is done. I appreciate all the help.

I am not home currently to take a picture but found a picture I can use. You can see the top bolts mounted with a nut on the top of the bracket, not inside

Was able to open the access plate on the bracket and take pictures. When I pulled the access plate, there was no silicone/sealant under it. No water in there other then condensation, should I apply sealant to to plate when finished?

Thank you very much for the picture, helps as I didn't know if the bolts used a lock washer or threadlock. I assume they put some sealant on the bolt as well? I will take a picture as soon as the rain lets up. I did look in the holes and it seems like the threads do not go all the way to where...

I am not sure I feel comfortable enough to drill out the holes to apply a bolt and lock nut. I am afraid I would mess the bracket up. I have called 2 Grady dealers, a yamaha repower dealer and all directed me to call the factory. I called them and was advised to call a dealer. I believe...

Boat was purchased in December, not worried about it now. I am just looking to move forward. I will try again to clean them out and see what happens.

Unfortunately it was not a private sale, the gps/fish finder and transducer was also removed. Not worried about the f/f as we purchased a new garmin to replace an old raymarine it came with the day we bought the boat. It unfortunately has happened before when looking at another boat a few...

Boat was in storage prior to us buying it, when we first saw the boat everything was there. The second time we saw it, it was still intact. When it arrived in our driveway it was 2 bolts short, I assume someone needed them more then we did. I do not believe they fell off as someone took time...

I have cleaned and brushed both holes out, I have tried the bolts on both sides and they seem to stop at the same place on either side. I will try again as suggested and see how it goes. I thank everyone for the great suggestions, hopefully I can make progress and be able to get on the water.

Hello, thank you for the suggestions. The bottom 2 holes measure 3" from where the hole of the bracket bottoms out, to the outside of the outboard. I have tried a 3" bolt, but it gets real tight and I have just under an inch before it makes contact with the outboard, tried 2 1/2 and again just...

Hello all, new to the forum. We recently purchased a 225 Tournament, and the bottom 2 bolts on the bracket that should be holding the outboard are missing. Have a hard time finding the length required. Spoke to 2 dealers and was advised to contact Grady-White directly, who then told me to...