Search results

Yes I was planning on doing it myself. But I "highly" doubt they will give me any reimbursement. Thanks for your input.

Re: Wet transom Help!! Please!!!! I spoke to Joe the vp of sales at Grady white on Friday. He wants me to send some pictures and he assured me they will help me figure this out. I already taken the boat to two Grady dealers with no positive outcome and I also spend the money to have the boat...

Re: Wet transom Help!! Please!!!! I used 5200 to glue the brass drains in place. I have the back of the boat covered with the tarp forward to but not including the deck floor drains. There is no flex in the transom but I am just being proactive

Re: Wet transom Help!! Please!!!! I did try spraying the boat down with a hose however the only place the water shows up is once it is at the core of the transom

Forgot to say "lowes"

Go to and buy zep all purpose cleaner and degreaser. Dilute it as necessary start with a heavier dilution.

Re: Wet transom Help!! Please!!!! That is my plan to replace the core. However I have to find leak first. There is very little foam back there on this model

Re: Wet transom Help!! Last night there was a storm and I checked bilge this morning. Bilge had a tiny bit of water in it. Approx 4-6oz. It wasn't even enough to make its way to drain. The voyager has a step up transom so drain is approx 18"below transom. And approx 24" forward of transom

Re: Wet transom Help!! Yes there is a removable plate. But no water is in transom. It the transom is stepped up from drain plug

Re: Wet transom Help!! yes I removed the outboard to seal the angle aluminum. I also replaced the brass drains on the step transom. Keep in mind those parts are covered with tarp.

Re: Wet transom Help!! Thanks for your response. However no rain water gets into the bilge. I did check all the drains and scuppers for leaks and I cannot find anything. All the fittings are tight with no cracks.

Re: Wet transom Help!! I forgot to mention this occurs while boat is on trailer. I also tested engine holes.

I have a 1998 grady white voyager with a single outboard. I recently removed the infamous corroded aluminum cap on the transom I also removed the rub rail and resealed the seam with 5200 and reinstalled rub rail. When I did that I noticed my transom was wet. I did drill a few 1/4" holes in...

I have a 1989 Grady White 204C with a fresh mercury 200 optimax that I just put on it. Any suggestions of prop sizes and max rpms?

Trailer brakes The kit I purchased from eastern marine was for a single axle kit, however there is an optional kit that makes it a dual axle kit.

Trailer Brakes!!!!! I have a ez loader dual axle trailer that I also tow an 89 GW overnighter. Last lear I replaced the brakes on it with TIE DOWN Vented Disc Brake S.A. Complete Kit from Easternmarine.com. I really have to say it was actually a 30 minute job and they work very well..